Skip to content

LION SHIELD, REALISTIC, FANTASY, MOVIE, PROP, REAL

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1k views
  • 8 likes
  • 1 download
  • 2 collections
  • 1 make
License
3D design format
7 files (TXT and ZIP) Close
  • ExtendedShield.zip
    • ShieldWallDeco/IndividualPartsPrint/3MF/Base.3mf
    • ShieldWallDeco/IndividualPartsPrint/3MF/Bottom.3mf
    • ShieldWallDeco/IndividualPartsPrint/3MF/Left.3mf
    • ShieldWallDeco/IndividualPartsPrint/3MF/Right.3mf
    • ShieldWallDeco/IndividualPartsPrint/3MF/Top.3mf
    • ShieldWallDeco/IndividualPartsPrint/AllPartsPrint.3mf
    • ShieldWallDeco/IndividualPartsPrint/AllPartsPrint.stl
    • ShieldWallDeco/IndividualPartsPrint/STL/Base.stl
    • ShieldWallDeco/IndividualPartsPrint/STL/Bottom.stl
    • ShieldWallDeco/IndividualPartsPrint/STL/Left.stl
    • ShieldWallDeco/IndividualPartsPrint/STL/Right.stl
    • ShieldWallDeco/IndividualPartsPrint/STL/Top.stl
    • ShieldWallDeco/SinglePrint/ExtendedShield.3mf
    • ShieldWallDeco/SinglePrint/ExtendedShield.stl
    • ShieldWallDeco1Hole/IndividualParts/3MF/Base.3mf
    • ShieldWallDeco1Hole/IndividualParts/3MF/Bottom.3mf
    • ShieldWallDeco1Hole/IndividualParts/3MF/Left.3mf
    • ShieldWallDeco1Hole/IndividualParts/3MF/Right.3mf
    • ShieldWallDeco1Hole/IndividualParts/3MF/Top.3mf
    • ShieldWallDeco1Hole/IndividualParts/AllPartsPrint.3mf
    • ShieldWallDeco1Hole/IndividualParts/AllPartsPrint.stl
    • ShieldWallDeco1Hole/IndividualParts/STL/Base.stl
    • ShieldWallDeco1Hole/IndividualParts/STL/Bottom.stl
    • ShieldWallDeco1Hole/IndividualParts/STL/Left.stl
    • ShieldWallDeco1Hole/IndividualParts/STL/Right.stl
    • ShieldWallDeco1Hole/IndividualParts/STL/Top.stl
    • ShieldWallDeco1Hole/SinglePrint/SinglePrint.3mf
    • ShieldWallDeco1Hole/SinglePrint/SinglePrint.stl
    • ShieldWallDeco2Hole/IndividualParts/3MF/Base.3mf
    • ShieldWallDeco2Hole/IndividualParts/3MF/Bottom.3mf
    • ShieldWallDeco2Hole/IndividualParts/3MF/Left.3mf
    • ShieldWallDeco2Hole/IndividualParts/3MF/Right.3mf
    • ShieldWallDeco2Hole/IndividualParts/3MF/Top.3mf
    • ShieldWallDeco2Hole/IndividualParts/AllPartsPrint.3mf
    • ShieldWallDeco2Hole/IndividualParts/AllPartsPrint.stl
    • ShieldWallDeco2Hole/IndividualParts/STL/Base.stl
    • ShieldWallDeco2Hole/IndividualParts/STL/Bottom.stl
    • ShieldWallDeco2Hole/IndividualParts/STL/Left.stl
    • ShieldWallDeco2Hole/IndividualParts/STL/Right.stl
    • ShieldWallDeco2Hole/IndividualParts/STL/Top.stl
    • ShieldWallDeco2Hole/SinglePrint/SinglePrint.3mf
    • ShieldWallDeco2Hole/SinglePrint/SinglePrint.stl
  • MainFiles.zip
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/3MF/Base.3mf
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/3MF/Bottom.3mf
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/3MF/Left.3mf
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/3MF/Right.3mf
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/3MF/Top.3mf
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/AllPartsPrint.3mf
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/AllPartsPrint.stl
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/STL/Base.stl
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/STL/Bottom.stl
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/STL/Left.stl
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/STL/Right.stl
    • ExtendedShield/ShieldWallDeco/IndividualPartsPrint/STL/Top.stl
    • ExtendedShield/ShieldWallDeco/SinglePrint/ExtendedShield.3mf
    • ExtendedShield/ShieldWallDeco/SinglePrint/ExtendedShield.stl
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/3MF/Base.3mf
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/3MF/Bottom.3mf
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/3MF/Left.3mf
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/3MF/Right.3mf
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/3MF/Top.3mf
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/AllPartsPrint.3mf
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/AllPartsPrint.stl
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/STL/Base.stl
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/STL/Bottom.stl
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/STL/Left.stl
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/STL/Right.stl
    • ExtendedShield/ShieldWallDeco1Hole/IndividualParts/STL/Top.stl
    • ExtendedShield/ShieldWallDeco1Hole/SinglePrint/SinglePrint.3mf
    • ExtendedShield/ShieldWallDeco1Hole/SinglePrint/SinglePrint.stl
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/3MF/Base.3mf
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/3MF/Bottom.3mf
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/3MF/Left.3mf
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/3MF/Right.3mf
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/3MF/Top.3mf
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/AllPartsPrint.3mf
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/AllPartsPrint.stl
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/STL/Base.stl
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/STL/Bottom.stl
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/STL/Left.stl
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/STL/Right.stl
    • ExtendedShield/ShieldWallDeco2Hole/IndividualParts/STL/Top.stl
    • ExtendedShield/ShieldWallDeco2Hole/SinglePrint/SinglePrint.3mf
    • ExtendedShield/ShieldWallDeco2Hole/SinglePrint/SinglePrint.stl
    • MultiPartPackage/PrintedInPartsIndividually/3MF/Bottom.3mf
    • MultiPartPackage/PrintedInPartsIndividually/3MF/Center.3mf
    • MultiPartPackage/PrintedInPartsIndividually/3MF/HandleLeft.3mf
    • MultiPartPackage/PrintedInPartsIndividually/3MF/HandleRight.3mf
    • MultiPartPackage/PrintedInPartsIndividually/3MF/Left.3mf
    • MultiPartPackage/PrintedInPartsIndividually/3MF/Right.3mf
    • MultiPartPackage/PrintedInPartsIndividually/3MF/Top.3mf
    • MultiPartPackage/PrintedInPartsIndividually/MultiPartPackagedSplitParts.3mf
    • MultiPartPackage/PrintedInPartsIndividually/MultiPartPackagedSplitParts.stl
    • MultiPartPackage/PrintedInPartsIndividually/STL/Bottom.stl
    • MultiPartPackage/PrintedInPartsIndividually/STL/Center.stl
    • MultiPartPackage/PrintedInPartsIndividually/STL/HandleLeft.stl
    • MultiPartPackage/PrintedInPartsIndividually/STL/HandleRight.stl
    • MultiPartPackage/PrintedInPartsIndividually/STL/Left.stl
    • MultiPartPackage/PrintedInPartsIndividually/STL/Right.stl
    • MultiPartPackage/PrintedInPartsIndividually/STL/Top.stl
    • MultiPartPackage/SinglePrint/MultiPartPackaged.3mf
    • MultiPartPackage/SinglePrint/MultiPartPackaged.stl
    • ReadMe.txt
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/3MF/Base.3mf
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/3MF/Bottom.3mf
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/3MF/Left.3mf
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/3MF/Right.3mf
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/3MF/Top.3mf
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/STL/Base.stl
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/STL/Bottom.stl
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/STL/Left.stl
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/STL/Right.stl
    • StandaloneSinglePieceNoHandles/PrintedInParts/IndividualParts/STL/Top.stl
    • StandaloneSinglePieceNoHandles/PrintedInParts/StandaloneSinglePieceNoHandlesPARTS.3mf
    • StandaloneSinglePieceNoHandles/PrintedInParts/StandaloneSinglePieceNoHandlesPARTS.stl
    • StandaloneSinglePieceNoHandles/SinglePrint/StandaloneSinglePieceNoHandles.3mf
    • StandaloneSinglePieceNoHandles/SinglePrint/StandaloneSinglePieceNoHandles.stl
    • StandaloneSinglePieceWithHandles/PrintedInParts/IndividualPartsPrint/3MF/Base.3mf
    • StandaloneSinglePieceWithHandles/PrintedInParts/IndividualPartsPrint/3MF/HandleLeft.3mf
    • StandaloneSinglePieceWithHandles/PrintedInParts/IndividualPartsPrint/3MF/HandleRight.3mf
    • StandaloneSinglePieceWithHandles/PrintedInParts/IndividualPartsPrint/STL/Base.stl
    • StandaloneSinglePieceWithHandles/PrintedInParts/IndividualPartsPrint/STL/HandleLeft.stl
    • StandaloneSinglePieceWithHandles/PrintedInParts/IndividualPartsPrint/STL/HandleRight.stl
    • StandaloneSinglePieceWithHandles/PrintedInParts/StandaloneWithHandlesSeperate.3mf
    • StandaloneSinglePieceWithHandles/PrintedInParts/StandaloneWithHandlesSeperate.stl
    • StandaloneSinglePieceWithHandles/SinglePrint/StandaloneSinglePieceWithHandles.3mf
    • StandaloneSinglePieceWithHandles/SinglePrint/StandaloneSinglePieceWithHandles.stl
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Base.3mf
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Bottom.3mf
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Left.3mf
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Right.3mf
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Top.3mf
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Base.stl
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Bottom.stl
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Left.stl
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Right.stl
    • WallHanging/WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Top.stl
    • WallHanging/WallDeco1Hole/PrintInParts/SinglePrintParts.3mf
    • WallHanging/WallDeco1Hole/PrintInParts/SinglePrintParts.stl
    • WallHanging/WallDeco1Hole/SinglePrint/SinglePrint.3mf
    • WallHanging/WallDeco1Hole/SinglePrint/SinglePrint.stl
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Base.3mf
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Bottom.3mf
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Left.3mf
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Right.3mf
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Top.3mf
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Base.stl
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Bottom.stl
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Left.stl
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Right.stl
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Top.stl
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/SinglePrintWallDeco2.3mf
    • WallHanging/WallDeco2Hole/PrintInParts/PrintedInParts/SinglePrintWallDeco2.stl
    • WallHanging/WallDeco2Hole/PrintInParts/WallDeco2HoleParts.3mf
    • WallHanging/WallDeco2Hole/PrintInParts/WallDeco2HoleParts.stl
    • WallHanging/WallDeco2Hole/SinglePrint/WallDeco2Hole.3mf
    • WallHanging/WallDeco2Hole/SinglePrint/WallDeco2Hole.stl
  • MultiPartPackage.zip
    • PrintedInPartsIndividually/3MF/Bottom.3mf
    • PrintedInPartsIndividually/3MF/Center.3mf
    • PrintedInPartsIndividually/3MF/HandleLeft.3mf
    • PrintedInPartsIndividually/3MF/HandleRight.3mf
    • PrintedInPartsIndividually/3MF/Left.3mf
    • PrintedInPartsIndividually/3MF/Right.3mf
    • PrintedInPartsIndividually/3MF/Top.3mf
    • PrintedInPartsIndividually/MultiPartPackagedSplitParts.3mf
    • PrintedInPartsIndividually/MultiPartPackagedSplitParts.stl
    • PrintedInPartsIndividually/STL/Bottom.stl
    • PrintedInPartsIndividually/STL/Center.stl
    • PrintedInPartsIndividually/STL/HandleLeft.stl
    • PrintedInPartsIndividually/STL/HandleRight.stl
    • PrintedInPartsIndividually/STL/Left.stl
    • PrintedInPartsIndividually/STL/Right.stl
    • PrintedInPartsIndividually/STL/Top.stl
    • SinglePrint/MultiPartPackaged.3mf
    • SinglePrint/MultiPartPackaged.stl
  • ReadMe.txt
  • StandaloneSinglePieceNoHandles.zip
    • PrintedInParts/IndividualParts/3MF/Base.3mf
    • PrintedInParts/IndividualParts/3MF/Bottom.3mf
    • PrintedInParts/IndividualParts/3MF/Left.3mf
    • PrintedInParts/IndividualParts/3MF/Right.3mf
    • PrintedInParts/IndividualParts/3MF/Top.3mf
    • PrintedInParts/IndividualParts/STL/Base.stl
    • PrintedInParts/IndividualParts/STL/Bottom.stl
    • PrintedInParts/IndividualParts/STL/Left.stl
    • PrintedInParts/IndividualParts/STL/Right.stl
    • PrintedInParts/IndividualParts/STL/Top.stl
    • PrintedInParts/StandaloneSinglePieceNoHandlesPARTS.3mf
    • PrintedInParts/StandaloneSinglePieceNoHandlesPARTS.stl
    • SinglePrint/StandaloneSinglePieceNoHandles.3mf
    • SinglePrint/StandaloneSinglePieceNoHandles.stl
  • StandaloneSinglePieceWithHandles.zip
    • PrintedInParts/IndividualPartsPrint/3MF/Base.3mf
    • PrintedInParts/IndividualPartsPrint/3MF/HandleLeft.3mf
    • PrintedInParts/IndividualPartsPrint/3MF/HandleRight.3mf
    • PrintedInParts/IndividualPartsPrint/STL/Base.stl
    • PrintedInParts/IndividualPartsPrint/STL/HandleLeft.stl
    • PrintedInParts/IndividualPartsPrint/STL/HandleRight.stl
    • PrintedInParts/StandaloneWithHandlesSeperate.3mf
    • PrintedInParts/StandaloneWithHandlesSeperate.stl
    • SinglePrint/StandaloneSinglePieceWithHandles.3mf
    • SinglePrint/StandaloneSinglePieceWithHandles.stl
  • WallHanging.zip
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Base.3mf
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Bottom.3mf
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Left.3mf
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Right.3mf
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/3MF/Top.3mf
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Base.stl
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Bottom.stl
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Left.stl
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Right.stl
    • WallDeco1Hole/PrintInParts/IndividualPartsPrinted/STL/Top.stl
    • WallDeco1Hole/PrintInParts/SinglePrintParts.3mf
    • WallDeco1Hole/PrintInParts/SinglePrintParts.stl
    • WallDeco1Hole/SinglePrint/SinglePrint.3mf
    • WallDeco1Hole/SinglePrint/SinglePrint.stl
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Base.3mf
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Bottom.3mf
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Left.3mf
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Right.3mf
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/3MF/Top.3mf
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Base.stl
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Bottom.stl
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Left.stl
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Right.stl
    • WallDeco2Hole/PrintInParts/PrintedInParts/IndividualParts/STL/Top.stl
    • WallDeco2Hole/PrintInParts/PrintedInParts/SinglePrintWallDeco2.3mf
    • WallDeco2Hole/PrintInParts/PrintedInParts/SinglePrintWallDeco2.stl
    • WallDeco2Hole/PrintInParts/WallDeco2HoleParts.3mf
    • WallDeco2Hole/PrintInParts/WallDeco2HoleParts.stl
    • WallDeco2Hole/SinglePrint/WallDeco2Hole.3mf
    • WallDeco2Hole/SinglePrint/WallDeco2Hole.stl

Learn more about the formats
Publication date 2023-04-17 at 06:30
Design number 1172914
Bayfaire

Bayfaire

3D printer file info

3D model description

Realistic Fantasy Lion Shield that comes in multiple different options for printing. Regular shield for holding or using, wall deco shield, wall display shield and much more. Compatible with all 3d printing technologies, tested to work best with PLA.

I have included a single zip for download with all variations, or you can download each variation indivually if the file is too big.

There are 5 variations of the shield listed under the following folders:
Extended Shield - The shield with no handles, with a flat backing that extends outwards as an extra layer to make it thicker.
MultiPartPackage - The Default Shield, Split into multiple small parts. Center, Left, Right, Top, Bottom, Handle 1, Handle 2.
StandaloneSinglePieceNoHandles - The Default shield with no handles. Offered as a Single print or multiple parts.
StandaloneSinglePieceWithHandles - The Default shield with seperate handles. Its split into 3 parts, Base, Handle 1 and Handle 2.
WallHanging - The Default shield with two options, hole on top, or hole on both top and bottom to hang on walls. Offered as single print or multi-part.

For Commercial License and to Unlock All my models
Subscribe to my Patreon!
Patreon

Check out our Socials for this Design and more Creations!
Tiktok
Instagram
Youtube
Twitter

3D printing settings

Default Temperature Settings:
Nozzle: 200
Bed: 60

If you live in a more colder climate or area try the following:
Nozzle: 215
Bed: 60

Supports Recommended If Used:
If not printing flat on bed, tree support seem to work well with the model. Consider using it if you are having any issues printing.

Categories

All designs β€Ί Game β€Ί Magic / RPG tabletop / Toys

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.