REMOVABLE 25mm to 28mm base adaptor

Simple yet effective way to transform a 25mm base into a tournament legal 28mm base non-destructively. You can either keep it separated (it won't fall) or glue it with a drop of superglue

++++

I recently was told by a tournament organization that my old 25mm base Dire Avengers were not legal, since GW updated the base that comes with the kit. I thought this was bullshit because I built them in the bases that came with the kit when i bought them back in the day.

Halas they were actually right and I had to put myself in front of the task of rebasing 20 models with nice looking bases that I put a lot of effort making (these were some of the first minis I painted).

Instead of that I designed this non-destructive method to rebase them. Printed in Black PLA, the material is flexible enough it will deform to open and let the ring go to where it is supposed to.

++++

I will update the design if some new solution comes to mind, suggestions are wellcome!

20 of them took 20 min to print for me

Printer: Bambu Lab P1p 0.4 Nozzle; BLACK PLA

First Layer Speed 50 mm/s
Outer Wall Speed 200 mm/s
Inner Wall Speed 300 mm/s
Top Surface Speed 50 mm/s
Overhang Speed 50 mm/s
Supports Disabled
Brim Disabled
Layer Height 0.34
First Layer Height 0.34
First Layer Line Width 0.5
Outer Wall Line Width 0.4
Inner Wall Line Width 0.45
Top Surface Line Width 0.42
Wall Loops 2
Top Shell Layers 3
Bottom Shell Layers 3
Infill 0%