Husqvarna Viking 2000/6000 Replacement Parts

Here is a collection of parts for the Husqvarna Viking series sewing machine. Please note that this is an ongoing project and will be updated as requests are received. I am still looking for a sponsor who can help provide all the "programmer" cam dimensions.

You can find the manual for the viking series here:
https://www.manualslib.com/products/Husqvarna-6020-8886589.html

Designing and prototyping these builds are time consuming and can become expensive, please consider donating if you found them useful

Thanks for using my designs!
Buy me filament / coffee?
http://paypal.me/KR34T1V

Please note that these designs are a "best effort" and are not guaranteed to work in your scenario. I am not an engineer and have undergone no such formal education.

1. (Cam Stack Gear, Viking #4111595-01) $50 - Retail
   ..* Material
   ..* PLA \ ABS
   ..* Resolution
   ..* 1.6mm
   ..* Infill Density
   ..* 30-50%
   ..* Support
   ..* Everywhere
   ..* Instructions
   ..* When installing the "Fixed Cam" heat up the metal shaft until it is too hot to touch, then proceed to push the cam onto the shaft ensuring an even fit. (you will most likely have to re calibrate your reverse & zigzag cam followers as well)

2. (Crank Slide, Viking #4114948-01) $70 - Retail
   Awesome model by user "alexchally" can be found here:
   https://www.thingiverse.com/thing:4342076

3. (Hand Wheel "Unknown Part Number")
   ..* Material
   ..* PLA \ ABS
   ..* Resolution
   ..* 1.6mm - 2mm
   ..* Infill Density
   ..* 30-50%
   ..* Support
   ..* Everywhere
   ..* Instructions
   ..* Remove Supports and install on Machine.

4. (Selector Knob & Cover "Unknown Part Number")
   ..* Material
   ..* PLA \ ABS
   ..* Resolution
   ..* 1.6mm
   ..* Infill Density
   ..* 30-50%
   ..* Support
   ..* Everywhere
   ..* Instructions
   ..* Remove Supports and install on machine, the cover can be clipped on the knob.

5. (Cam Stack Gear -No Retainer, Viking #4111595-01) $50 - Retail
   Please take note this part is untested
   ..* Material
   ..* PLA \ ABS
   ..* Resolution
   ..* 1.6mm
   ..* Infill Density
   ..* 30-50%
   ..* Support
   ..* Everywhere
   ..* Instructions
   ..* Remove Supports and install on machine.

6. (Cam Stack Gear - Shaft + Retainer, Viking #4111595-01) $50 - Retail
   Please take note this part is untested
   ..* Material
   ..* PLA \ ABS
   ..* Resolution
   ..* 1.6mm
   ..* Infill Density
   ..* 30-50%
   ..* Support
   ..* Everywhere
   ..* Instructions
   ..* Remove Supports and install on machine

7. (Programmer Cam A "Unknown Part Number") $40 - Retail
   ..* Material
   ..* PLA \ ABS
   ..* Resolution
   ..* 1.6mm
   ..* Infill Density
   ..* 30-50%
   ..* Support
   ..* Everywhere
   ..* Instructions
   ..* Remove Supports and install on machine.
   7

8. (Bobbin)
   ..* Material
   ..* PLA \ ABS
   ..* Resolution
   ..* 1.6mm
   ..* Infill Density
   ..* 30-50%
   ..* Support
   ..* Buildplate
   ..* Instructions
   ..* Print Bobbin standing upright in order to get a stronger print quality