Paintbrush Holder with Cup
Paintbrush Holder with Cup
3D
Published 2023-04-25T08:57:32+00:00
This is a paintbrush organizer that holds 19 thin handle and 19 thick handle paintbrushes with an additional four slots for very large handle brushes like dry brushes. Assembly is very easy by having both the top and bottom where the rounded corners are facing you. Turn the top part, the part with the long tubes, to have the tubes down and they will slide into the large holes on the base. Recommend to super glue the top to the base by putting a couple of dots on the inner edge of each large slot of the base then set the top on. I was able to print both the top and bottom at the same time but this depends on the size of your print surface. Very sturdy and doesn't tip. Also included a small cup about 80mm tall for brush washing.
No supports required. Simple printing.
| Date published | 25/04/2023 |
| Dimensions | 170mm wide x 57mm deep x 80mm |
| Support Free | YES |