FLEXI TROOPAS BONES KOOPA 3MF - 4 COLORS 'SUPER MARIO BROS - NOT SUPPORT

This is a flexi troop of bony koopas from the super Mario bros movie is an articulated model that needs NO brackets, NO assembly, and prints very well with PLA.

You will find 2 files 3MF GENERICOS BAMBU LAB WITH 4 COLORS.

You will find 16 STL PIECES, with which you can build your own army of bony koopas and you can assemble them to your liking, they are amazing for playing or collection, they do not need supports, and are printed on site, all have articulated mouths

You'll find 6 versions of koopas with differences, including one with a hole in its head, to use as a keychain, or hang on your kids' suitcase.

you will also find a luigi cap, if you saw the movie you can see how you lose it while running because of a koopa hole, this one snaps in on all models.

You will find 2 ways to assemble the turtle shell with wings or without wings.

You will also find a spear or weapon that goes halfway into his hand with little pressure.

You will find a koopa with broken ribs giving battle effect.

You will find a special koopa to use as a keychain so you don't lose your keys I used the scale size at 80 and at 100 it looks perfect.

you will find a koopa to paint which has 2 ribs to print and glue NOTE: STL COIL MUST BE PRINTED WITH WALLS IN HORIZONTAL EXPANSION LESS ( - 0.3) TO FIT.

Note: the jaw remains open with a little force when opening .

I recommend using glue on some parts so it won't come apart, less on Luigi's cap.

If you want him to hold a pencil or ephero with his hands, you can scale it to 75%.

As with all my flexibles, I went through several iterations to make sure it was strong, and easy to print without supports.

Feel free to share pictures of your impressions on this page, I'd love to see them.

Thank you.

If you like my flexible bony koopa, check out my other models you'll love.

For all users who have an active subscription to me https://www.patreon.com/studiosDB92 you will find a letter of authorized by STUDIOS DIGITAL BROTHERS to be able to sell all the models already 3D printed.

ALL STUDIOS DIGITAL BROTHERS designs are protected by Intellectual Property Law My digital files can NEVER be resold or shared in any way.

Subscriptions stl promo models at: https://www.patreon.com/studiosDB92

*Without brackets

*Print-in-place (without mounting)

*10 to 15% filler to be sure.

*I suggest 3 walls to make the peaks stronger.

*PLA works very well

NOTE: THE 2 STL STRIPS MUST BE PRINTED with walls in Horizontal Expansion ( -0.3 ) to fit, it is the only stl file that needs it.

*Make sure you have a good adhesion on the bed if you are going to print small size use a raft.