Hidden Logitech c920e Camera Enclosure

Hidden Logitech c920e Camera Enclosure 4/29/23
Designed by JWizard

Thank you for choosing Hidden Logitech C920e Enclosure!
We wanted to monitor who was coming into our office. We used the Logitech C920e Camera we had ordered. We didn’t want the camera to be noticed. Therefore, we enclosed the camera in a black case so someone looking at the case would not see the camera lens. Now we can keep the video feed on our computer where we sit and monitor everyone walking into the room.

The top fits snuggly on the box. It will not pop off by itself. The usb cable can be fed through the top of the box. The eye of the camera can be aligned and inserted toward the bottom of the box.

The following files are included:

logic C920e camera enclosure - box.stl
logic C920e camera enclosure - top.stl

Materials used to create model in photos:

Overture Matte Black PLA

Ideas:

The camera enclosure should not be scaled. It was specifically made for the C920e camera. You should only use black filament so the lens blends into the box.

Conclusion:

Let us know how you like our Hidden Logitech c920e Enclosure. Please post your makes and share your comments.

Follow us so that you will be notified when we release our next project.

Thank you for your support,
JWizard

Printing Instructions:
15% infill
No support for the top and bottom of the box
Random Seam