Blade Runner Pistols - 2 Printable models - STL - Personal Use

Printable 3d models from Blade Runner.STL format.

All models include the ability to set the backlight. There is also a display stand for each product.

Models are perfect for cosplay, as the high accuracy of the details of the models and the presence of illumination are worthy of the highest admiration of the audience.
The models will be a wonderful addition to any collection of collectors and fans, as they are able to deliver a lot of warm positive emotions due to high detail, attention to detail and the ability to place LED lighting.

Collection includes 2 models:

• Agent K's Pistol (https://cults3d.com/:690444)
• Deckard's Pistol (https://cults3d.com/:690321)

GIFT printable STL model:

• Keychain Dekard's Pistol

For more details, we recommend that you familiarize yourself with the lot you are interested in on its page.

Agent K's Pistol model include:

• 23 stl files to 3d printing (longest part demensions: 195*51*31mm).
• 3 stl files - stand for Agent K’s Pistol (biggest part demensions : 255*94*12mm)
• Digital Instruction for assembling.
• List of components you will needs for assembling with discription.

List of components needs for assembling Agent K's Pistol with LEDs lighting:

• 3-4mm LEDs
• 20-30 ohm resistors
• CR2032 batteries slot BS-6
• 8*8mm button switch
• M3 screws
• M3 insert nuts 3x5x4 mm
• wires

The model of Agent K's Pistol assumes a demo stand and the presence of LED backlight.

Dimensions:
217 mm x 132.5 mm x 39.5 mm

Dekard's Pistol model include:

• 33 stl files to 3d printing (biggest part demensions: 135*126*24mm, longest part demensions: 178*32*28mm).
• 3 stl files - stand for BladeRunner Pistol.
• Digital Instruction for assembling.
• List of components you will needs for assembling with discription.

List of components needs for assembling Dekard's Pistol with LEDs lighting:

• 3-4mm LEDs
• 20-30 ohm resistors
• 2xAAA batteries slot
• 8*8mm button switch
• M3 screws
• wires
• 8*2mm round magnet

The model of Dekard's Pistol assumes a demo stand and the presence of LED backlight.

Dimensions:
240.6 mm x 152.4 mm x 46 mm

FOR PERSONAL USE ONLY. NOT INTENDED FOR COMMERCIAL PRINTING.

We have model collections intended for commercial printing. If you are interested in such models - please check out our collections.

We prefer layer height 0.15-0.20mm