House Of The Raven

Bonus model!

Gladiator Designs 3D and Layers In Green have another collaboration for you! This model is both fun and easy to print as well as a bit thought-provoking.🤔🤣 Inspired by the late Edgar Allen Poe the House of the Raven by Gladiator Designs 3D makes a great addition to the footed crow from Layers In Green. The Raven is known for its intelligence and wisdom, so what better theme than adding some references to a clasic writer for its home. Together, these two models create a unforgettable piece that's really fun to print. The raven house prints without support. When printed at the same scale as the raven there is room for the raven to perch in the attic of the house. The holes in the roof provode a place for the ravens feet to hook, allowing him to perch on the roof as well. I have added a few little "easter eggs" in the house for the Poe fans out there. 😁

Only the house is included here. Head over to Layers In Green and pick up the Raven for $1.45 here: cults3d.com/en/3d-model/art/raven-footling

!IMPORTANT! This listing DOES NOT include commercial licensing for the Raven. A Commercial License is required if you wish to sell your prints of the Raven. Licensing is available for the raven here: https://www.patreon.com/Layersingreen

Prints in place without supports.

Recommended printing at 60% for both the house and raven.

I use a .4 nozzle

.2 layer height

15% infill

Prints in place without supports.

Recommended printing at 60% for both the house and raven.

I use a .4 nozzle

.2 layer height

15% infill