XBOX XBOX360 DVD VIDEO DISPLAY STAND LED PROTECTOR

Model for XBOX XBOX360 GAME CASES AND DVD VIDEO.

Hello, I present you my design. The idea came from my love for collecting video games. It occurred to me how to protect my favorite collections and at the same time be able to show them off on my shelves. And so!!!!, the idea came up. I hope you like it.

The truth is that once you print it and assemble the pieces, it looks beautiful on the shelf and as I wanted to improve it more.... I added some LEDs and a battery with its switch, and now I really love the final result.

• I used a Creality Ender 3 S1. printer with a fairly fine tuning. All well calibrated.

• The materials I used PLA, PLA +, XINKTONGZHILIAN AND SUNLU brand, all look good to me, but these two in particular, after many, many tests are my favorite.

MATERIAL USED

-The laminator I used is CURA. Apart from the STL files, I put you also the 3MF files, because there you have exactly all the parameters that I have used after many hours of work. However, I understand that each one can configure his printer as he knows best. But if this helps to make a good print, I upload them too.

Basic parameters:

• Quality 0,20mm.

• Wall lines 4

• Top layer 4

• Bottom layer 4

• Smoothing (not all parts, see 3MF files)

• Filling 20%

• Speeds between 50 and 60

• Supports

. Material 190 ° will depend on your PLA, bed temperature, I the.

I always leave it at 50º.

in the protective STL which is where the game or dvd case is stored, the skirt has been removed because it has a length of 202mm.

and in the model support 3 STL lights are the same files but one of them has added 2 supports, it is much better the piece.

FILES 9. Parts of design 4

• CE3S1_PROTECTOR XBOX360-DVD.3mf

• CE3S1_PROTECTOR XBOX360-DVD.stl

• CE3S1_SUPPORT 3 LIGHTS XBOX360-DVD(2 extra supports).stl

• CE3S1_SUPPORT 3 LIGHTS XBOX360-DVD.3mf

• CE3S1_SUPPORT 3 LIGHTS XBOX360-DVD.stl

• CE3S1_SUPPORT EXHIBITOR XBOX360-DVD.3mf

• CE3S1_SUPPORT EXHIBITOR XBOX360-DVD.stl

• CE3S1_LIGHT SUPPORT COVER XBOX360-DVD.3mf

• CE3S1_LIGHT SUPPORT COVER XBOX360-DVD.stl

Materials used:

• Quick glue

• Silicone (hot gun better)

• Battery holder for button cell batteries:

https://www.amazon.es/dp/B09SG8RP21?ref=ppx_pop_mob_ap_share

• LED Master 3 mm:

https://www.amazon.es/dp/B003O5NFN2?ref=ppx_pop_mob_ap_share

• Battery Button:

https://www.amazon.es/dp/B08MZLG7DV?ref=ppx_pop_mob_ap_share

• Mini Switch:

https://amzn.eu/d/4xqJ9tb

• Led Support:

https://amzn.eu/d/fso7b08

These are the materials used, which are readily available, however I have put the link where I bought them, in case it helps and you can see stockings.

Well glad to be on this platform.

I really hope you like the idea!!!!!😊

if you have any doubt you can write me or send me an email.

I will be glad to answer you as soon as possible.

Greetings to all !!!!