AEDWRF14 - Clan Tinleg's Speakeasy

The Clan of Tinleg is well known for smuggling the finest ales all over the world of Aach'yn. While you can drink anywhere in the Dwarven Lands, they prefer to hide away the best brews for secret rounds of fellowship and story.

The Goddess Djul has long protected the Dwarves, and led them through victory and life. Many drinks are downed to her beauty and wisdom in battle.

This 4in dragonbite tile comes in 3 parts: A base 4x4 model with stairs going up to a second level. Also an angel statue center and angel wings. All models print without additional supports and connect with dragonbite clips.

TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size​: 0.15mm minimum. 0.1mm recommended.
Infill​: 10% for all models recommended
Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports​: Larger Terrain pieces can suffer with lightning infill.

MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None

MINIATURE RECOMMENDED PRINT SETTINGS
This set includes both unsupported and presupported miniatures using the Lychee Slicer. It also includes a Lychee save so you can modify the supported sections further.