Armada Seeker (Starscream, Thundercracker, Skywarp, Ramjet) Upgrade

An upgrade kit to increase shoulder and leg articulation in the original Armada Starscream mold. The figure can still transform!

Disassembly of the original figure required.

Parts List (prints required for a full kit for one figure):
2x armd-star-03-01-04
2x armd-star-03-02-04
1x armd-star-04-01-04
1x armd-star-04-02-04
1x armd-star-04-03-04
1x armd-star-04-04-04
2x armd-star-07-01-02
2x armd-star-07-02-02

Some additional hardware is also needed for assembly. Screws may need to be trimmed for best fit:
4x M2x6mm Screw
6x M2 Nut
2x M2x14mm Screw
2x M3x12mm Screw
2x M2x8mm Screw

Also included in the download are 2 Skywarp specific parts. These are swap outs for the Starscream versions, created because my Skywarp had a ratchet that was 30 degrees or so off from vertical. These parts, armd-skwp-03-01-02 & armd-skwp-03-02-02, accommodate that offset.

Assembly Diagrams can be found in the design images.

My Armada Seeker Missile Upgrade can be found here: https://cults3d.com/en/3d-model/game/transformers-armada-seeker-modified-missile

With all pieces, sanding may be required for a good fit, depending on your printer and settings. Paint may affect final fit.

This model is not to be uploaded or sold in any form and is intended for personal use only. Other file formats may be made available upon request.

I printed this model in 1.75 mm PLA Plastic, with a .4mm nozzle filament printer. Support material required. Different print orientations may vary results, sanding may be required after printing.