Piledrivers for Transformers WFC Siege Rumble or Frenzy 3D print model

This one came out as a suggestion to complete the look for the two Decepticon tapes bots with their iconic piledrivers.

These fit over the hands of the original bots and come as three separate parts to be assembled post-print.

Enter Siege Rumble! His hands will need to be flipped downwards so they fit nicely in the slots of the piledrivers. The hammerheads attach to the pistons which can be moved up and down inside the piledrive to be posed as you like!

Further, there is a version of the hammer head with a 5mm port on its underside, allowing for effect parts to be used in tandem!

Near the top end of the piledrives, a top-facing 3mm peg and side-facing 5mm port also allow for more effect parts to be added on for more blooshiness!

As always, have fun 3d printing out this somewhat long over-due set for your own Frenzy and Rumbles! ;)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog