Jewellery sand casting flask 3D print model

Scalable sand casting flask model suitable for 3d printing.

NOTE: Not really suited for replicating the flask itself with greensand, though this can be achived by packing/sealing the pour opening with sand and constructing a suitable core to place thereof.

• Fully drafted for easy sand removal of single complete part.

• Xray images for draft angles shown above

• Pre-set hole location for dilling locator pin guides

• Size:126mm x 115mm x 27.5mm (maximum wall thickness of 7.8mm minimum wall thickness 2mm)

• Casting volum 76.5 cm3 (aluminum approz 205g per flask)

• File format STL