The Original V8 Can Cooler Motor or Engine Ice Chest

Apparently there are some copy cats here... but don't fall for it. This is the original one, and there are some huge differences. My Motor Can Coolers are assembled with all printed parts... Mine has a handle that can easily fold away AND the handle is a customer wrench that is used to assemble it... once it's built you can use it as a handle!!!

This version is Version #2 of 3. This one has a functional oil pan. The oil pan also prints in two pieces, and has a real drain plug like a real motor.

All of these can be printed on any printer Ender 3 and bigger. It take's about 1.3kg of filament to print the whole thing.

NONE of my designs are available for commercial use unless you have my permission in writing. However I have THREE variations of this model (one has real moving crank that pops the cans like cylinders) this one, one prior to this and one that is coming out soon. The new one will be a V6&V8 version and is modular. IF YOU WANT TO SELL MY MODELS COMMERCIALLY PLEASE JOIN MY PATREON! You get commercial rights to this and ALL 300+ models I make. I would love to have you.

https://www.patreon.com/ls3dp

more links: https://www.linktr.ee/ls3d
LETS GOOOOOO! Join me on TikTok @LS3dP

I used 0.28 layers, 50mm/s on the wall and lightening infill at 30%.

To attach the oil pan you will need 4 heat m3 inserts and 4 m3x10mm screws. Or you can 3D Gloop it... or Glue it. I recommend using silicone on the oil pan etc. to reduce leaking.