Ice Staff Inspired Prop CoD Zombies Origins Staff

this cosplay and display prop was inspired by the iconic Ice staff from call of duty zombies ! the files are high quality and designed for easy printing, some extra bits like pvc pipe and wood dowel is required to fully recreate one of these awesome props ! these files are split up for large format 3d printers so further slicing may be required to fit on your machine ! I will release the other 3 staffs if its desired so feel free to comment if you want to see the other 3 staffs released. These are the simplified, diy friendly files, not my personally used files. If you are looking for more functional files that require a bit more tinkering, tedium, and craftiness but also allow for the breaking apart of the staffs, the usage of metal rods and tubes for strength, and the inclusion of leds and moving parts on the heads you can send me a message over my email where we can discuss further ! (theapropalypse@gmail.com)

Required extras !

1x 42inch long 1/2inch diameter pvc pipe for body shaft
4x 1.125inch long 1/4inch diameter wood dowel pins for strengthening claw arms on base
5x 4.75inch long 1/4inch diameter wood dowel rods for circling the coil section
Small screw or pin for attaching trigger

print parts with desired settings, supports will be necessary.