Flexible, articulated dragon snake

This snake-dragon is made up of as many parts as you like.

The joints inside are flexible, so you can roll it up and it will retain its shape.

Assembly requires no glue, except for the following parts:

• eyes, horns, teeth

The gold rings on the body are printed flat, then folded and glued to the body to create several colors.

There is an alternative version of the body where this ring is directly integrated into the body.

The file contains these models:

Head (large):

• skull

• jaw

• horns

• teeth

• eyes

Body (small, medium, large):

• full body / body without ring + gold ring

• tail part 1

• tail part 2 (gold)

joints (flexible):

• link between bodies/tail

• link for head

Body parts, tail parts and ties are available in 3 sizes:

Small, medium, large.

There are 7 types of links to assemble the snake:

• large to large

• large to medium

• medium to medium

• medium to small

• small to small

• small to medium

• medium to large

These links are used to interlock the parts of the snake together, and must be printed in flexible thread to work properly.

This allows the creature to be disassembled and reassembled at will, to give it a length that can range from a few centimeters to several kilometers long, if you prefer.

For a length of 35cm, I assembled:

head + 9 bodies (large) + 5 bodies (medium) + 8 bodies (small) + tail (small)

Supports: cue part 2: The golden tip

Filling: 15% of total

The joints should be checked for proper operation after scaling.

To create new sizes:

Lower size: x 0.9

Upper size: x 1.11