Mac Miller Kids Ashtray

Introducing the Mac Miller-inspired Ashtray STL file!

Pay tribute to the legendary musician while adding a touch of style to your smoking experience. This meticulously designed STL file allows you to 3D print a unique ashtray featuring iconic Mac Miller elements.

Crafted with attention to detail, this ashtray captures the essence of Mac Miller's music and spirit. The design seamlessly blends his distinctive imagery with functionality, providing a practical yet artistic addition to your space.

Simply print the STL file on your 3D printer and bring this exclusive piece to life. Whether you're a fan of Mac Miller or appreciate exceptional craftsmanship, this ashtray will make a captivating addition to any collection.

Get ready to infuse your smoking rituals with a touch of artistry – order your Mac Miller-themed Ashtray STL file today and let the creativity flow!

Layer Height: 0.1-0.2mm - This determines the vertical resolution of your print. A lower layer height produces finer details but increases print time.

Print Speed: 40-60mm/s - The speed at which the nozzle moves during printing. Higher speeds can reduce print time, but too high may compromise print quality.

Extruder Temperature: 190-220°C - PLA typically requires a lower temperature range compared to other materials. Adjust within this range to find the optimal temperature for your specific PLA filament.

Bed Temperature: 50-60°C - PLA generally does not require a heated bed, but a slightly warm bed can help with adhesion. Adjust based on your printer and filament.

Cooling Fan: 100% after the first few layers - PLA benefits from active cooling. Set the cooling fan to 100% after the first few layers to improve print quality and reduce the risk of warping.

Infill Density: 20-30% - Determines the internal structure of your print. Higher percentages increase print strength but may require more material and time.

Wall Thickness: 0.8-1.2mm - The thickness of the outer shell of the print. Increase for stronger prints or decrease for faster prints with less material.

Top and Bottom Layers: 3-5 - The number of solid layers at the top and bottom of the print. Increasing this value improves print durability and surface finish.

Retraction: Enabled - Retraction helps reduce stringing and oozing. Enable retraction with a distance of 1-2mm and a speed of 40-60mm/s.

Print Bed Preparation: Use blue painter's tape, a clean glass bed, or apply a thin layer of adhesive like glue stick or hairspray for better adhesion.

Remember, these settings may vary depending on your specific printer, filament brand, and desired print outcome. It's always a good idea to perform test prints and fine-tune the settings based on your observations and requirements.