The Demogorgon LRM Launcher for Kraken (Bane)

This is an LRM mod for Kraken (Bane) mech designed by Sergey Tolokin, aka Siberian_troll. I also made some modifications on the mech itself to make the parts swappable. I also had to take out some of the fine details from the original mech design so it will be a bit friendlier for my fdm printer.

One great advantage of having multiple parts is that you can orient each part so it would print best. For fdm example, I find orienting the holes of the missile launcher to face sideways instead of up makes it much better.

To attach the parts together, I decided to use 7mm dia. pins (also 3d printed). With the tight fit of the pins, I do not think you need to glue the piece together. I did provide spaces for you to put 4mm dia. (1mm thick) disc magnets.

Software: Blender

Printer: Ender 3 v2

Filament: E-Sun PLA+

Layer height: 0.08mm
Line width: 0.4mm

Wall thickness: 1.2mm
Wall line count: 3
Z seam alignment: Random
Fill gaps between walls: Everywhere

Nozzle temp: 195
Bed temp: 60
Flow: 96

Print speed: 50
Initial layer speed: 10
Retraction: 7

Support: Tree or regular
Orientation:
LRM - socket hole face down; lrm holes facing sideways; [Edit: I was able to print the lrm with doors open. The doors are fixed though. Make sure to use the revised stl files if you want to print the lrm with doors.
Legs - upright, feet down
Torso - front pointing up, but this will ruin the rear. May be printing this at an angle is better, but I have not tried it.
Shoulder pins -are printed horizontally with the flat side on the bed.