Flask holder adapter

adapter for attaching a bottle cage or other accessory to a frame not fitted with bottle cage screws.

Convenient for mounting a bottle cage or other accessory on a frame not equipped with bottle cage screws, or on another part of the bike such as the seatpost or fork.

can be used on a scooter.

• 3 files available

SupportGourdeD.stl -> the main part provided as standard with threaded holes diameter 5mm

AttachmentC.stl -> if you want to create your own scatch straps

Outil.stl -> a small tool for removing strap holders

Personally I glued a foam under the object to come on the bike frame see photo.

It's possible to put a slightly wider strap between the adapter and the water bottle holder.

I created this item because my mountain bike is not equipped with a water bottle holder screw, and I use it when I go out without my backpack.

Quality: 0.15mm

Initial layer height: 0.32mm

Filling: 20% of thickness

Temperature: 205°c

Tray temperature: 50°c

Printing speed : 50 mm/s

Platen adhesion : skirt * 3

SupportGourdeD.stl -> Support : yes / Printing time : 1h46

Length of filament used: approx. 5m30

AttachmentC.stl -> Support : no / Printing time : 0h13

Length of filament used: approx. 0m46

Tool.stl -> Support : no / Printing time : 0h53

Length of filament used: approx. 2m34