Wind Emergency Plugin for Gazebo

This object will serve to unblock the gazebo awning in the presence of strong winds or sudden turbulence, avoiding damage to the structure of the gazebo and awning; it also adds more convenience in installing and removing awning.

The object consists of 5 files in stl format that will have to be printed with a 3d printer.

After printing, the 5 pieces will be assembled in order to create the plugin to be inserted in the final part of the gazebo structure which will replace the accommodation where the gazebo awning is anchored.

Usually the awning of the gazebo has 8 anchor points on the structure, for this reason 8 plugins have been printed to be inserted at each anchor point of the awning.

Note:
in the event that the system unlocks the gazebo awning (in case of strong wind), if previously the awning had not been anchored in some way to the frame, this can be dragged away by the wind.
This small inconvenience does not occur on gazebos equipped with an upper chimney, where the awning would still remain blocked by the central chimney structure of the gazebo; otherwise it is necessary to find a way to keep the cloth tied to the structure of the gazebo.

Test done with PETG and PLA.
Best result with PETG or ABS filament
(considering the temperatures that can reach the iron beams on sunny days).

Filling:
at least 30% filling of the base, arm and pivot;
100% gangium and clip fil.