Why pay for this single file when you have it + over 500 more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform!

Click here to join STLFLIX

LPEV Lunar Rover 4x6

This STL file is recommended for FDM Printers!
3D Printing Time: 2 Days 12 Hours and 32 Minutes
Approximately length: 20cm x 15.5cm x 14cm

You know what is better than 4 wheels? 6 wheels! With this Lunar and Planetary Exploring Vehicle (or LPEV), the moon will be the second most interesting destination for your weekend. The first is your printing station!

It features an individual suspension system and spinning wheels. It's all support free and the assembly is super simple. The wheels are printed separately, so if you want to print it in flexible filament, just use concentric infill and you'll be exploring other planets in no time. 

Check the assembly instructions below:

Attach the pieces "LPEV Lunar Rover - 6x4_Back_Body_Base" and "LPEV Lunar Rover - 6x4_Back_Chassis" to the "LPEV Lunar Rover - 6x4_Car_Body".

Attach the "LPEV Lunar Rover - 6x4_Damper 1" to the "LPEV Lunar Rover - 6x4_Back_Suspension_Arms".

Attach the "LPEV Lunar Rover - 6x4_Back_Chassis" to the "LPEV Lunar Rover - 6x4_Back_Suspension_Arms".

Attach the "LPEV Lunar Rover - 6x4_Damper 2" to the "LPEV Lunar Rover - 6x4_Middle_Suspension_Arms", and then attach them to the "LPEV Lunar Rover - 6x4_Front_Chassis".

Attach the "LPEV Lunar Rover - 6x4_Damper 3" to the "LPEV Lunar Rover - 6x4_Front_Suspension_Arms", and then attach them to the "LPEV Lunar Rover - 6x4_Front_Chassis".

Next, place the assembled suspension onto the "LPEV Lunar Rover - 6x4_Car body".

Finally, attach each "LPEV Lunar Rover - 6x4_Wheel" to its axle.

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 60mm/s (All the other layers) / 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height:  0.12 mm
Recommended Layer Height:  0.2 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

COPYRIGHT & SELLING RIGHTS

This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.

To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited downloads, and marketing content for every single file.

Go commercial and skyrocket your own store with STLFLIX!

GO COMMERCIAL!

USEFUL LINKS

Get to know us a little better!

Website | Instagram | TikTok | Twitter

What are you waiting for? Join thousands of other makers from all around the world.

HAPPY PRINTING!