La Granja Deluxe Re-Insert

Recreation of the insert and organizer for La Granja Deluxe Master Set.

The goals of this insert are to allow for much faster setup and tear-down, the use of trays during gameplay, and to give the inside of my box a break from getting scratched into oblivion. The full improvements:

• It improves setup by allowing trays to be used during gameplay.
• The player tray contains all the stuff that a player will need! Just hand one to each player. They can be used during gameplay to hold used donkey tiles and markers.
• The Donkey Song tray can be placed on the table and used during gameplay.
• Each side of the table has a tray with coins and point markers.
• Each player gets a small tray to hold their coins and points. (Mostly had to fill space in the insert).
• A dice tray where the dice can go in AND come out...
• Supports sleeved cards.
• Supports vertical storage.
• No more scratching the sides!

I've designed and tested this insert to work with Sleeve Kings Standard or Mayday Premium sleeves. Sleeves that are too long may not fit.

Each design includes in it the number of copies that need be printed, if more than one (eg. x4).

Some pieces have a "Upper" / "Lower" or 1 / 2, plus a "Full". For larger printers, print the Full. For the rest of us, print the halves and glue them together.

The Craft Markers Lid Tab can be glued to the top of the Craft Markers Lid so that the cards don't move around in the insert.

Some pieces have holes for magnets. I use 5x2mm magnets. Print these so that the magnet hole faces up.

See photos for arrangement, and feel free to ping me if you have questions! Note that the pictures were taken with an earlier version of some designs. I've made some adjustments or added ways to get to some pieces more easily.

0.4mm
0.2mm layer height

Supports for the card holders but everything else can be printed without supports.