Vacuum hook collection

​Commercial license: You can print and sell these models.

Available models:
1. Plane round model,
2. Plane star fish,
3. Star fish.

Concept:

The flat surface of these models with water as medium creates a strong vacuum grip when pressed against a non-porous smooth surface. Theoretically these model can hold up to 11kgs and practically tested up to 1kg which is more than 300times there weight.

Benefits:

 Safe and secure,

 Using fluorescent (Glow in the dark) material for hook will give an advantage of finding keys in the dark,

 No need to drill hole / use adhesive.

Note: The print must be on smooth surface using glass bed is preferred but not compulsory, use high bed temperature to avoid glue stick/adhesive. Make sure that there are no air bubbles after pressing against wall.

Materials:

Holder: Any flexible resin/Filament – TPU, Nylon, E.T.C

Hook: strong resin / Filament - PLA, PETG, ABS, E.T.C,

Printer: FDM / RESIN,

Retraction: 5mm speed 60,

Nozzle Temp: minimum 190 to 210 C for PLA / minimum 200 to 230 C for TPU

Bed Temperature: 90 C (no glue stick/adhesive needed)

Infill: Minimum 8%,

Print in place,

Print speed: 25

Support: No supports needed, Layer height: 0.2, (use high diameter nozzle for fast printing)

Build plate adhesion: brim at least 1mm,

Print time:

Plane models: 13minutes

Star fish: around 30minutes,

Hook: 2 minutes.

The hook is a snap fit no adhesive required for assembling.

Thank you,

Have a wonderful day.