GRINDER ZELDA

Today we present you a grinder designed to be 3D printed consisting of three parts: the body, divided into two parts and the lid. This grinder has been carefully designed and adjusted with all the necessary tolerances to ensure functionality and ease of use.

The grinder body features an ergonomic and elegant design that fits perfectly in the hand. It has a diameter of 50 mm and a height of 31 mm, making it large enough to grind large quantities of herbs, but small enough to be portable and discreet.

The grinder body is designed with a series of sharp teeth that are capable of grinding the herb with incredible efficiency. The teeth are strategically placed to allow for even and fast grinding. In addition, the lid has a flat surface that can be used as a base for loading the grinder.

Both parts of the grinder are designed to fit together perfectly, ensuring that the herb is ground evenly and smoothly. The lid fits the body with an internal and external thread, allowing for secure and easy closure.

One of the best features of this grinder is that it is designed to be 3D printed, which means you can print it on your own 3D printer at home. All you need is the design file, which is available online, and a 3D printer. Printing the grinder is easy and quick, allowing you to get a customized grinder in no time.

Printing material: For the grinder body and lid, it is recommended to use a strong and durable material, such as PLA, ABS or PETG.

Layers: The thickness of each printing layer should be 0.2 mm to achieve good printing quality.

Filling: 30% filling is recommended for the grinder body and lid to achieve a solid and strong structure.

Printing speed: Suggested printing speed is 50-60 mm/s to ensure accurate and uniform printing.

Printing temperature: The printing temperature will depend on the material used. For PLA a printing temperature of 200-220°C is recommended, for ABS 230-260°C, and for PETG 220-240°C.

Adhesion to the bed: It is important that the part adheres well to the printing bed to prevent it from peeling off during printing. To achieve good adhesion, it is recommended to use a special 3D printing adhesive tape or a textured printing surface.

Supports: no supports are required to print these parts as they are designed to be printed without supports.

Layer height: 0.1mm

Print speed:50mm/s

Filling: 20%.

Nozzle diameter: 0,4mm

Material: PLA/ABS