UNLIMIT3D - Edge 30 Fusion Cover

Hello world!

I'm Ivan, creator of UNLIMIT3D.

In this opportunity I bring a case for the Motorola Edge 30 Fusion smartphone, made both in Flexible material, as well as, PLA finishes.

Do you have such a smartphone and you ran out of case?

Not anymore!

Holster material and miscellaneous supports: FLEX/TPU (Printalot Flex recommended)

Layer height: 0.2 mm

Number of walls: 3

Nozzle Diameter: 0.4 mm

Filling Density: 20% - 30% (Triangular pattern or your choice)

Supports: Yes, I attach required support models.

Material of MMP (duckfoot) and Letters: PLA

Layer height: 0.2 mm

Number of walls: 3

Nozzle Diameter: 0.4 mm

Filling density: 20%

• Don't worry about the number of models, simply using the combine option on the laminator will place them correctly.

• Remember to check the height (Z-axis) of the set of all combined models before proceeding to laminate everything on the printing plate.

• The models that make up the Letters (UNLIMIT3D) and the MMP model (paw) in PLA are printed separately.

• Models composing Letters (UNLIMIT3D) may require negative Horizontal Expansion in the laminator, e.g. -0.1 mm.

• For the support leg, you need two 5 x 0.5 mm magnets. You also need something like a very thin, strong metal pin that you can use as a hinge.