She Hulk Collectible Edition

When you download you will have 8 Stl Files (Total 1 GB )

Disassembled Parts

1.Upper Body She Hulk
2.Lower Body She Hulk
3.Right Arm She Hulk
4.Left Arm She Hulk
5.Base She Hulk

Full Version
1.Base
2.She Hulk Figure With Base
3.She Hulk Figure

This product is Nuskul Art Collectible Edition.
Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Technical Suggestion

While designing the model, narrow angles were avoided as much as possible. When throwing support, calculate 45% slope.
While cleaning the supports, heating a needle over a flame and touching it to the ends of the supports can ensure smooth cleaning.

Follow me for more models
You can send me a message about the model or in general.
You can also reach me via social media.

Twitter : https://twitter.com/YunusKullebi
Instagram: https://www.instagram.com/yunuskullebi/
Instagram : https://www.instagram.com/nuskulart/
Linktr : https://linktr.ee/yunuskullebi

Print Temperature : : 200
Table Temperature : 60
Layer Height : 0.2 mm
Intıal Layer Heigt : 0.2 mm
Wall Line Count : 0.4 mm
Fill Density : % 20

Support Settings

Support Stracture : Tree
Maximum Branch Angle : 60
Branch Diameter : 3
Trunk Diameter : 16
Branch Diameter Angle : 5
Support Placement : Everywhere
Prefferred Branch Angle : 25
Diameter İncrase to Model : 1
Minimum Height to Model : 3
Intial Layer Diameter : 6
Branch Destinty : 20
Tip Diameter : 0.8
Limit Branch Reach : Yes
Optimal Branch Range : 30
Rest Preference : On Model if Required
Support Overhang Angle : 55
Support Pattern : Gyroid
Connect Support Lines : Yes
Support Density : 5
Support Line Distance : 8
Intial Layer Support Line Distance :8
Support interface Thicknes : 1.2