Christmas door corners vol 2 - Multipack of 10 models 3D print model

Embrace the joy of the Christmas by adding these unique touche to your door

SCALE & DIMENSIONS The model has the longest side of about 150mm maximum so it can be printed on any printer. Thickness is 1mm. Models can be scaled without problems, to avoid losing detail, i recommend not going below the original dimensions.

IMPORTANT INFO As the models have fine details, I always recommend waiting until the plate is completely cold before removing the print, as the print can easily warp or break if it is still warm and soft. A gentle squeegee can be very helpful. If you have a flexible magnetic plate, I recommend always removing the print with a squeegee and not bending the plate precisely to avoid deformation.