Cat in a Witch hat

Did you know that a witch has a familiar that helps guide it, and that said familiar usually has a telepatic link with the witch? This familiar is a very special ghost cat, that you or I can't see. Its only the witch that can see it and know its there. On and around halloween every year, theres a short period where the familiar, if it chooses to, can be seen by mere mortals. The familiar usually appears in the form of a pumpkin cat skull, and they can be seen to hide in the witches hat or floating around all hallows eve lighthing the way for new witches!

I also have a Patreon, If you are interested in getting more than one file at a time. You get my full catalog when signing up, with lots of files to print:
https://www.patreon.com/Sassiecat3d

Important when buying the design:
This is my design and copyight to me sassiecat3d, it's not to be used commercially or resold without my permission, the stl file is under the same clause, not to be re-sold or use commercially without my permission. You are welcome to contact me if you would like to know more. :-) You agree to these terms when you purchace this file.

This file has my logo on the bottom since its for personal use. If you want to purchase the file without the logo, you need to get the commercial version.

For buying the commercial version where you can print and sell copys of a physical 3d printed version, go here:
https://cults3d.com/en/3d-model/home/cat-in-a-witch-hat-commercial-version

I used a .4mm nozzle, .16mm layer height, I use 5% infill.

I printed these down to 50% and they fully function at that size.

No supports needed :-D It a fully print in place model!

Make sure your printer is all set with a good calibration and retraction before printing it.