Cursed Tails Doll (Sonic The Hedgehog)

The Tails Doll is not of this world.
It is neither machine, nor truly alive, and thus it can never die.
It is the antithesis of life.
It is the void in which existence itself is meaningless, and hence suffers eternal hunger. A hunger for the life it can never aspire to.
It’s insatiable appetite is for souls, and yours will do nicely.
He is every pain you ever felt, and every illness you have ever feared.
He is all your darkest secrets, and some that you have yet to discover.
He is everything and nothing.
He is the future.
He is the Omega.
He is slightly orange, and somewhat fuzzy.
They say if you stare into the abyss for long enough, the abyss stares back. If you stare at the Tails Doll for long enough, it will not only stare back but feast upon our eye balls from the inside as well.

Yo, Zach here. If you’re looking for the easiest way to see how I assembled my tails doll as pictured above, check out the video link below. While you’re over there, think about helping a Zach out and liking the video and subscribing to the channel. Anything helps. For real.

https://youtu.be/AKsrHydN2dU

Couple important bits of information for you. Feel free to scale all the parts to your liking. The doll used in the video is the same scale as the pre made 3D models if you want yours to be the same size.

An optional piece is the (optional zipper tab.stl) file that is also scaled appropriately to the model. I personally used a real zipper for my tails doll, however, the option is there for you if you want to rig something up.

You will need to print:

1 Tails Torso.stl
1 Head.stl
2 Hand.stl
2 Foot.stl (Mirror 1 foot in the slicer)
1 Antenna Top.stl
1 Antenna Cord.stl
1 Limbs.stl

The (Tails Limbs.stl) pieces are assembled on the build plate exactly how they are arranged on the doll itself.

I recommend printing the parts at a 20% gyroid infill. I used PLA plus filament. It is possible to use a lightning infill, just be aware that doing so will destabilize the plug holes.

I chose to wrap my printed pieces in adhesive spray and appropriately colored/textured fabric. I'm sure it would look good painted as well.

If you have any questions, leave them in the comments section via the Youtube link. Enjoy!