Lenovo 65W AC Power Adapter Cable Organizer

Simplify your life with our Lenovo 65W AC Power Adapter Cable Organizer. This clever 3D printable accessory is designed to slide onto your Lenovo 65W AC Power Adapter, providing a hassle-free solution for managing your charging cables.Key Features:

Efficient Cable Management:
Say goodbye to tangled and messy cables. This reel neatly holds your charger cables in place, keeping your workspace tidy.

Usage:
To effectively utilize the Lenovo 65W AC Power Adapter Cable Organizer, fold the thicker cable in half and slide it along with the body of the AC adapter into the organizer.

Two integrated notches allow you to secure the cables at your desired length, preventing excess cable clutter and ensuring a clean and organized workspace.

Customizable Design:
3D print this accessory in a color that matches your style or your charger. Personalize it to your liking.

Quick and Easy Installation:
Slide the reel onto your Lenovo 65W AC Power Adapter effortlessly, without any need for tools or modifications.

Printing Process: This model is designed for FDM 3D printing.
Infill Density: I recommend an infill density of 30-50%, with the gyroid infill pattern. Adjust the density based on the wall thickness.
Wall Thickness: A minimum of 1 mm is recommended for the wall thickness.

Print Speed: Printing time is around 10 hours with a 45mm/s print speed using a 0.4mm nozzle.

Orientation: For the best printing results, the model should be printed in a vertical orientation with the adapter hole side down and with supports.

Cable Protection: If the user is worried about scratching the cable, it is recommended they sand the integrated notch to prevent the sharp edge from biting into the cable rubber.