Street Life – Leather n Lace - by SPARX

I am sure we all like to paint lace . . and . . . we all like a bit of leather . . so the last of the old Shaz Photo Shoots (for now!) sculpted into a printable model.
I have uploaded 2 versions This “SAFE” one with the model wearing full underwear and a “NSFW” version with all of the files listed plus 3 extra torso’s with less underwear, as there was not enough content for the usual separate add-on pack.
The NSFW version is here;

https://cults3d.com/en/3d-model/naughties/street-life-leather-n-lace-and-adult-parts-by-sparx

The model full diorama includes an old street lamp that can be lit with lights of your choice.
The model has a removable lower coat and a separate right arm (no chain) should you only wish to print the model and not the panther.

The model is H280 in Height
The Diorama with the “Lamp Mid SHORT.stl” is 345mm in Height
The Diorama with the “Lamp Mid LONG.stl” is 410mm in Height

This download;

1 Torso
1 Heads (inc 1 Head Pin)
2 Long Coat parts
2 Right Arms
2 Pairs of legs
1 pair of shoes

1 Panther Body
2 Panther Heads
1 Panther Tail

7 Piece Street Lamp
1 Long mid street lamp post

2 Base’s

26 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS
NONE OF THE FILES ARE ORIENTATED READY TO PRINT. This will allow you to “join” parts if you have larger printers and wish to do so . .
Base is FDM print

TIPS:
Resin Printing;
Hollow 2.40 Raft 100%

Do not Hollow Raft 100%
Arms,Shoes,Lamp Light, Sign Front, Panther Tail.

FDM
ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.
You can assemble the full model prior painting and fitting to base.
Wire the sign and lamp column prior glue.
Paint the Lamp Light before fitting transparent lamp insert.

If using mesh stockings paint legs and shoes prior assembly.