cheeky worm

A flexible worm.

It is necessary to print it only in the slicer CURA or PRUSASLICER ! Do not use simlify 3D.It can not work with thin walls !

It is also necessary not to shrink the worm and print only to the original size or to make it larger

One worm(type 1) on a slip-on tongue that holds on the joint and this tongue is flexible up and down .
Type 2 is a nice classic worm :P

The eyes are a detached object and print separately. It is necessary to glue them after printing .

(type 1 (only body ) is approximately 120 mm long and type 2 is 123 mm long
I have also added a hanging option so there are type 1 and type 2 with a ring

---- my similar project ----
wild giraffe - https://cults3d.com/:1883333
wild giraffe two - https://cults3d.com/:1884717
sport camel https://cults3d.com/:1882486
flexi puppy https://cults3d.com/:1878607
flexi fat puppy https://cults3d.com/:1878601
flexi running dog 2 https://cults3d.com/:1875797
flexi running dog https://cults3d.com/:1875786
fat cow - https://cults3d.com/:1857749
baby parrot https://cults3d.com/:1854529
crazy cow - https://cults3d.com/:1855606
flexi kangaroo https://cults3d.com/:1851983
little parrot -https://cults3d.com/:1846424
chicken Dude - https://cults3d.com/:1845184
flexi chicken https://cults3d.com/:1842612
mini zebra - https://cults3d.com/:1840932
flexi rainbow zebra - https://cults3d.com/:1834488
flexi unicorn with horse https://cults3d.com/:1836882

mammoth HD https://cults3d.com/:1828907
STEGOSAURUS - flexible https://cults3d.com/:1825211
REX (Free I recommend free testing of my models ) https://cults3d.com/:1827655)

spinosaurus HD https://cults3d.com/:1829847
paraceratherium HD https://cults3d.com/:1832323
flexible triceratops https://cults3d.com/:1827315

If you want to support me you can show print 3d model on cult3d in MAKES section, thank you :P

3 Top layer
3 bottom layer
2 wals

0,16mm ( eye) - 0,1mm - 0,16 mm layer height
0,16mm - 0,28mm (worm) layer height
material 1 . PLA 2 .PETG ...
nozzle - 0,4 mm
----turn off supports ---