RGM84 Harpoon Container - MK141 Launcher

The RGM-84 Harpoon missile is a sea target missile and is widely used within NATO. It is also used by the German Navy. On ships, the Harpoon missile is mounted on the MK-141 launcher with 4 missiles per launcher. The launcher itself is rigidly mounted on the ship's deck.

Part of the set, of course, is not the missile itself, but only the MK141 launcher and the accompanying RGM84 Harpoon containers.

The model

The set consists of three components, some of which are mehmals to print. The model can be printed in any scale. For smaller scales, we recommend RESIN printing. For FDM printing, we have included the container in this set each as a whole model and for FDM printing as a 4-part model.

The launcher is saved in original size, so you can adapt it to any scale. Note that slicers read the model data smaller than it really is. Slicers turn the meter data into millimeter data.

The model is printable with conventional PLA. However, we recommend something more "elastic" material, such as bpsw. PLA+. This has a better bendability and makes the model less susceptible to breakage

Our advantages

This model is not designed for any specific scale. The scales given above are only a recommendation. However, also note that the quality of detail varies with your scale. The smaller your model, the more detail will be lost.

Any number of copies - Buy the product once and use it for your entire fleet within the household.

Decide for yourself what materials you use for printing.

You always have spare parts on hand and don't have to go through the hassle of researching defective parts even after years of operation.

The limits of printing are determined by your 3D printer. The build space of your printer determines the maximum possible scale.

Do you have any other question? Do not hesitate to contact us.

Follow the assembly instructions supplied