Amiga 600 case 3d print model

Amiga 600 enclosure 3d print model

This is a photorealistic and high-detailed 3d print model with 1:1 resolution, compatible to Amiga 600 keyboard and motherboard. Amiga 600(also known as A600) was a popular home computer in 90s which was made as a direct successor of Amiga 500+, it had a Motorola MC68000 processor inside and ECS chipset. It also had hard drive inside in HD versions, so it was possible to install OS and use it as a very convenient home computer.

Why should you buy this product?

if you want to mod your A600 case but want to make your mod be non-destructible
if your case is broken or yellowed
if you want to re-build Amiga 600 on your own from compatible motherboard and chip set
to make a high-detailed visualization of Amiga hardware
if you want to support Amiga demoscene :)
Features:

3d print model in 2 pieces(top, bottom) for 400x400 printers(on photo) - looks and fits very well
3d print model in 8 pieces(4 for top, 4 for bottom) for 200x200 printers
STL, STEP, SLDPRT files
*Important! *

Case does not contain holes for floppy on the high side. You need to draw(or drill) them manually - it was done to make it compatible for many other drives, such as Gotek and compatibles.

Printing details:

PLA 0.4 mm was used with supports, after that I used finishing
400x400mm printer, tested on Anycubic Chiron

Use PLA or PETg, 0.4 mm height with supports.
Also you can order prints on JLCPCB with SLA/SLS.