Frosty, the glowing snowman (several parts)

It's finally that time of year again, winter and Christmas are just around the corner. Snowman Frosty is already looking forward to the first snowflakes and the Christmas spirit.

Not just for dark winter days: "Frosty" decorative snowman with snowflake pattern

This adorable snowman will put a smile on your face. He's not just wearing a hat and scarf to make you feel safe. He also gives you his mischievous smile. Because he is happy that you are taking him in and that he doesn't have to stand alone in the cold. A real friend who brings a little light into the dark season.

An all-round successful decoration idea

Frosty is a sight to behold - from all sides! His funny bobble hat and thick scarf are sure to keep him warm. And his fluffy body looks like glittering snow powder ... as if he had just come in from outside.

The highlight: If you place a small LED lamp or fairy lights under Frosty, his snowflake pattern shines on his body.

Frosty has another surprise up his sleeve: his arms are detachable and can also hold real branches using the two adapters. This makes him look even more authentic.

Frosty has a textured surface throughout. This gives the hat and scarf a textile look and the individual layers are also difficult to recognize on the body.

Nobody will notice that it's not made of snow, but from your printer :)

Frosty consists of 7 (+2 optional arm adapters) easy to print parts. No support is necessary. (Note the print orientation in the pictures)

The parts are fixed together with a few drops of superglue.

No color change / multicolor printer is necessary.

If required, the mouth (as shown in the photos) can be dabbed with a little paint. Otherwise no painting is necessary.

White filament is required for the lithophane to work on the body.

Frosty makes an excellent impression even without lighting.

A 10-light LED with batteries was used as the light source;

z.B.: https://de.aliexpress.com/item/1005003391152074.html?spm=a2g0o.productlist.main.9.108775efYBDRug&algo_pvid=9a432f79-98dd-4855-b3de-77be30b0c7fe&algo_exp_id=9a432f79-98dd-4855-b3de-77be30b0c7fe-4&pdp_npi=4%40dis%21EUR%212.35%211.93%21%21%212.44%21%21%40211b619a16987680259232734ef488%2112000025562569494%21sea%21DE%212692336705%21&curPageLogUid=rubodZSqdIgk

oder https://www.amazon.de/LED-Lichterkette-warmwei%C3%9F-Lampen-%C3%98-10cm-Abstand/dp/B07FQS17N2/ref=sr_1_5?keywords=10er+led+lichterkette&qid=1698767929&sr=8-5

Finally, a tip: PETG is recommended for the hat and scarf. The light stringing, which is typical of PETG, reinforces the impression that it is real fabric.

#CHRISTMASXCULTS

Support is not necessary!

Body:

Nozzle: 0.4mm

Brim inside: 2mm

First layer: 0.2mm

Infill: 5%

Vertical walls: 4

Layer height: max 0.24mm

Speed: Lithiophane approx. 40mm/s

no support

Head:

Nozzle: 0.4mm

Brim inside/outside: 2mm

First layer: 0.2mm

Infill: 7%

Vertical walls: 3

Layer height: 0.16mm

no support

Cap, nose, eyes, arms, branch adapter:

Nozzle: 0.4mm

no Brim

First layer: 0.2mm

Infill: 7%

Vertical walls: 3

Layer height: 0.16mm

no support

Scarf:

Nozzle: 0.4mm

Brim inside/outside: 2mm

First layer: 0.2mm

Infill: 7%

Vertical walls: 3

Layer height: max 0.24mm

no support