Now that the MEKA Toki is complete started on the figures at 1/10th scale to fit and pose around the MEKA. I also sculpted and cut a 1/6th fully printable version of the model also included. I used the Overwatch2 suit and my variations as there are not many models around wearing the latest suit. The 1/10th scale models have different arm positions to pose onto Toki, as well as a Pilot figure to fit inside the MEKA. Both 1/6th and 1/10th models have a single base to pose separately without the need to have the MEKA Toki. The models all have interchangeable heads, torso’s etc. to allow various combinations of the models clothing and pose to be created. There are head stands to store spare heads for both scales and parts are designed to fit small SLA printers as well as FDM. This Download is ONLY THE “SAFE” OUTFIT ALL PARTS ARE INCLUDED AS IN PICTURES TO CREATE A FULL MODELS AND BASE WITH ALTERNATIVE ARMS AND CLOTHING. All Print tested prior release. I will upload pics of completed painted model when I finish her . .
As previous an NSFW adult add-ons version is available to purchase separately contact me via email or FB (see main Profile) for details.
The Torso’s and Head parts are removable and interchangeable with magnets (see pics)
Model 1/6th scale 346mm Height. Model 1/10th scale 225mm Height.
I have zipped the parts into 2 main categories; Safe1-6.zip Contains 20 parts. Safe1-10.zip Contains 21 parts. Using 7Zip.
I have done this to keep apart to ensure you don’t make mistakes!
PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY
I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.
Why cut into many smaller parts I have been asked?
3D PRINTING SETTINGS
Resin 1/10 scale just be aware of hollowing too much! I found upper torso’s wall at 3.60 to stop arms hollowing. Heads at 2.60 Lower torso’s at 3.30 to stop shoes hollow and ankles solid . . Separate arms print solid
Resin 1/6 scale Allat 2.60 thickness apart from separate arms . Arms leave solid
FDM All parts in Cura printed well Arms and heads 60% fill 0.12 speed 40 Rest at 0.16 30% fill, speed 50