EXOGRIP, THE MODERN ERGONOMIC FOREGRIP

Sleek and sharp. With a large barricade stop and ergonomic grip profile, you'll find that the ExoGrip foregrip is exceptionally comfortable and natural to handle.

Required hardware:
-3x M5 by 25mm machine head Screws.
-3x M5 thread nuts.

This is the first accessory for the ExoTrek tactical accessory lineup.
All ExoTrek designs will feature the same mix of robust functionality and sleek modern design.
Im currently making sketches for the matching stock/grip and have plans for other rail accessories.
Buying my files or donating to my Buymeacoffee helps in supporting the costly process of prototyping and testing.
Any purchases are greatly appreciated.

Thanks for showing interest in my work and have a wonderful day!

Filaments used:
Inland Carbon Fiber PLA Black

recommended settings:
-Layer Height .16 to .20 mm
-6 walls thick
-2mm top and bottom thickness
-Infill Density 20% or 10% gyroid infil
-Support overhangs 40 degrees
-Support top Z interface spacing (top z gap) .23mm
-additional build plate adhesion such as brims or raft not required

additional reccomendations:

if you are able with your slicer, use .stp files for a far smoother finish with no visible polygons, as well as hide the seams as best you are able.

These are only recommendations based on results had with my printers (ender 3 s1 pro, bambulab x1 carbon) . You don't have to follow these settings of course.