Tooth fairy door for baseboard

Tooth fairy door to put on the baseboard together with the staircase.

• No supports are required for printing any of the files.

• The door has integrated hinges for direct printing WITHOUT supports.

• On the back of the door frame I have left some holes to put double-sided tape in case you want to leave it fixed somewhere in the house.

• Both the button and the sign have their holes to snap in but they can also be glued.

• The measurements are as follows:

-- Door with frame: 11.5 cm wide, 15 cm high, thickness 6mm.

-- Ladder: 10.5 cm high, 4cm wide, 5mm thick.

The measurement configuration is designed to be performed at layer height 0.2.

It is not necessary any type of support, since having the hinges integrated if we generate some support may be inside the vacuum for the operation of the shaft and will not let us open the door.

The file has different heights in frame, door and hinges to favor the change of color in the filament modifying the GCode, also in the sign this change of filament can be made since both the letters and the profile that surrounds them is in relief with respect to the base of the sign. In the photos I used 3 colors with this modification, another option is to print it all in one color and then paint.

Printing times:

• Door: 5 hours approx.

• Button: 10 minutes approx.

• Sign: approx. 15 minutes

• Ladder: 1 hour approx.