SUSE mascotte Office/Home hang keys set

Celebrating my design #110 with a lovely hang keys set for your home or office inspired by my daily driver for 3D designs, openSUSE Linux. The set came in four pieces: the main figure, the chameleon's eye, holder A and B (printable x4). I put a single cylinder piece in order to save space, but you have to print it four times.

Two important things to keep in mind:

1. Independently of what size you want to print this, it must be proportioned to your metal keyring holder because the pieces are designed with boolean so, the entire set can't have different scale between pieces.

2. the usual hot glue to fix the pieces are only recommended between the main figure, the eye and the bottom holder. The cylinders (x4) can be manually inserted and also, if they may break, you can easily replace them with a new print at the same scale. The back of the main figure present a slight drop level of the surface. That is the area where you can apply a 3M double-sided adhesive for walls. Better than nails and holes, right?

That's it :)

Made with Blender 3.6.5 LTS.

PS - please, consider to support openSUSE Linux with a nice review on distrowatch - https://distrowatch.com/table.php?distribution=opensuse - this OS is very underestimated. I think is the future, even for gamers and retro gamers (what a highly performing time machine!)

Manifold checked.