HYPERCUBE (TESSERACT) DIY

Make your own Tesseract today!

To assemble it, you will need:
- 261023-01-001-CORNER CONNECTOR - 8x,
- 261023-01-002-MIDDLE CONNECTOR - 8x,
- short wooden dowel - 8x (to connect internal and external cubes),
- medium wooden dowel - 12x (for internal cube),
- long wooden dowel - 12x (for external cube).

The ratio of wooden dowel lengths is 1 : 1.15 : 2.44, where 1 is the length of the shortest wooden dowel - example:
- short dowel 100 mm,
- medium dowel 115 mm,
- long dowel 244 mm

The connectors were designed in such a way that the wooden dowel with the external diameter of 10 mm (+-0,1mm) should create a press fit between the connector and the dowel.

There is no need to use any glue or fasteners to assemble the Tesseract!

All the files are oriented correctly.
I suggest to print the connectors with a small brim around them and with supports.

Purchasing this model gives you rights to download and print the part for your personal use only, redistributing my digital files or selling printed items is forbidden.

Material: a good quality PLA, PETG, ABS or ASA (for these two, having an enclosure is recommended),
Nozzle temperature: look at values suggested by the manufacturer of your filament,
Bed temperature: look at values suggested by the manufacturer of your filament,
Perimeters: at least two perimeters,
Layer height: a layer height of 0,20 mm will be sufficent to produce a nice looking part,
Supports: required,
Brim: required,