Skull mask

Contest winner: This model won 9th place in creality cloud's Halloween design contest. https://www.crealitycloud.com/contest/Halloween2023?tab=4

Commercial license: You can print and sell this model.

The Skull mask eyes has grid holes where one can see clearly and two oval holes are provided on the back where an elastic/ velcro can be placed, you can also use a rubber band / old face mask's ear elastic for it, anything works. Nostril holes also provided at nose for easy breathing. The eyes and nose were painted with an acrylic paint marker. The mask is Unisex and currently adult size and can be scaled form any adult to kid size and can used for Halloween, fun and wall art.

Video link: https://www.youtube.com/shorts/z9sR09qNpC0

Print time: 6hours 30 minutes with 1mm nozzle,

Line width: 1mm for 0.6 to 1mm nozzles and 0.8mm for 0.4mm nozzle.

Printer: FDM / RESIN, Filaments: PLA, PETG, ABS, E.T.C,

Infill: 0 to 5 %

Retraction: 3mm retraction speed 40

Nozzle Temp: 210 bed 90 for PLA (no glue stick/adhesive needed)

Support: touching build plate, don’t add support from top to teeth use a support blocker, add supports at lower jaw completely,

Support Z offset: 0.2, XY offset: 0.2 to 0.5, support interface lines,

Build plate adhesion: brim at least 15mm, brim replaces support turned on,

Request: Don't scare old and heart problem people.

Thank you,
Have a beautiful day.