UMAREX HDR 50 - PELLETS/SLUGS WITH 6, 7, 8, 9 AND 10MM STEEL BB CORE

3D PRINT PELLETS CAL 50 - DESIGN FOR UMAREX T4E HDR 50

THIS ARE TO BE USED ONLY FOR PRACTICE ... NOT SELF DEFENCE!

BEFORE PRINTING, ASSEMBLING AND USING THIS PELET, I STRONGLY RECOMMEND TO CHECK THE RULES AND REGULATIONS IN YOUR COUNTRY, REGARDING PROJECTILES WITH A METALLIC CORE! KEEP YOURSELF OUT OF TROUBLE!

VERSIONS "A" AND "S"

PRINT SAMPLE - CAL .50 - PRECISION PLUS - "A" - GHINT - WITH 9MM BB - WEIGHT 3.44GR

I TESTED BOTH VERSIONS, "A" (BB is position outside of the pellet) AND "S" (BB is position inside of the pellet) AND THE RESULTS WERE GREAT! THE TEST WAS DONE INDOOR!

IF YOU ARE LOOKING FOR A SUPPRESSOR FOR YOUR UMAREX HDR 50, PLEASE HAVE A LOOK:
https://cults3d.com/en/3d-model/game/umarex-50-suppressor-paintball-marker

IF YOU ARE LOOKING FOR A WAY TO CONNECT A LASER POINTER TO YOUR GUN... PLEASE SEE BELOW!
https://cults3d.com/en/3d-model/game/umarex-hdr-50-laser-pointer-connector

USE OF GLUE IS NOT REQUIRED, ALL BB ARE PRESS FORCED ON POSITION, USING THE SPECIAL DESIGNED TOOLS!

PELLETS "A" and "S" CLASS REQUIRE 6, 7, 8, 9 OR 10MM STEEL BB - IN PICTURES IS SHOWING A PLASTIC BB - ONLY FOR REPRESENTATION!

SINCE THE PRINT RESULT MAY VARY FROM PRINTER TO PRINTER... START BY PRINTING THE "CENTERED" VERSION ... SEE HOW IT FIT IN TO THE GUN DRUM... THEN PRINT A BIGGER (+) OR A SMALLER (-) VERSION OF THE PELLET... TEST WHAT FIT BETTER!

ALWAYS KEEP THE SAME BATCH IN TO A LABELED CONTAINER.
THE LABEL SHOULD STATE THE DIMENSION AND WEIGHT OF THE PELLET!

A PERFECT PELLET WILL NOT FALL FROM THE DRUM AND WILL NOT GET STOCK. TEST DIFFERENT BATCHES... USE WHAT FEEL PERFECT FOR YOU!

DO NOT REUSE DAMAGED PELLETS, RECOVER THE BB AND REUSE IT ON A NEW 3D PRINTED UNIT!

TO EASE THE ASSEMBLY PROCESS, A SET OF TOOLS ARE AVAILABLE !
USE A RUBBER HAMMER... DO NOT USE EXCESSIVE FORCE!
USE EYE AND HANDS PROTECTION! (PPE)

WHEN TEST AND USE THE PELLETS... USE SAFETY PROTECTION!

PELLETS CAN BE PRINTED WITH ANY TYPE OF FILAMENT; HOWEVER, IF PRACTICING IN AN OPEN FIELD, USING A BIODEGRADABLE FILAMENT IS STRONGLY RECOMMENDED

WARNING! THOSE ARE SMALL PARTS AND REPRESENT A CHOKING HAZARD! KEEP AWAY FROM CHILDRENS! ALWAYS USE EYE PROTECTION! USE ONLY FOR PRACTICE! DO NOT USE AGAINST OTHER HUMANS OR ANIMALS! COLLECT USED PELLETS... DO NOT POLLUTE!

THE ONE PRINTING THE PELLET IS ENTIRE RESPONSIBLE FOR ANY INCIDENT OR ACCIDENT RESULTING FROM USING THIS DESIGN. WE DO NOT ASSUME ANY RESPONSIBILITY!

BE RESPONSABILE! DO NOT TAKE ANY RISKS!

This KIT is for personal use only! Please read our policy! If you do not agree, please do not buy this product! Failure to comply with our policy will result in the immediate termination of your user license! Do not alter or modify to resale, share with others, make it public or redistribute in any form, digital or in physical form, all digital content as images, dxf, stl files, etc. Do not sell, share, makes it public or redistribute as it is in current form. Do not sale the final product! You will need a Commercial License in order to sell this final Product! For a commercial license please contact us!

Thank you for your interest in our product!

Stay safe, be safe and be happy!

DESIGN TO PRINT WITHOUT SUPPORT! BY COSTA!

SAMPLE IN PHOTO ARE PRINTED USING ABS (RED) AND PETG (BLACK & WHITE).

CAL .50 - PRECISION PLUS - "A" - GHINT - WITH 9MM BB - WEIGHT 3.44GR

PARTS ARE PRINTED USING BAMBU X1C PRINTER... USING BASIC SETTINGS.

PARTS ARE TO SMALL TO MATTER THE % OF THE INFILL, ANYWAY, JUST USE 3 LINES WALL AND 100% INFILL.

CLEAN ALL PRINT GLITCHES BEFORE USING!

PELLETS CAN BE PRINTED WITH ANY TYPE OF FILAMENT; HOWEVER, IF PRACTICING IN AN OPEN FIELD, USING A BIODEGRADABLE FILAMENT IS STRONGLY RECOMMENDED