CHRISTMAS FAIRY HOUSE 3 OF 5 - THE LITTLE BELL

NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. COMMERCIAL LICENSE ON MY PATREON. FULLACCESS AS SOON AS YOU JOIN, MULTI PARTS DESIGNS SO NO NEED FOR A MULTICOLOR PRINTER AND MOST OF THE PROJECTS ARE SUPPORT FREE!!! LINK TO PATREON :

https://www.patreon.com/PA1_MAKER

Here's the third model in the Christmas Fairy Houses Collection! The little bell!

Just like the other fairy house models, it is really simple to print and assemble as long as you read the instructions carefuly.

The model can be illuminated with a battery operated tealight if you want.

All the parts are support free EXCEPT two parts; The window frames.

But with the right settings, they are easy and quick to print.

The design was modified many times to make it easily printable.

The project is simple, just like my other fairy houses. Like i said above, only a few parts need supports (easy ones), parts are already placed in the right orientation and files have color coded names.

Again, some parts have fuzzy skin. It is indicated in the file names and also in the 3mf file, which ones are done with this setting. Parts in the 3mf file (for the bambulab owners) are already prepared with this setting (by object).

Note: the base is a little bit bigger than the other fairy houses. But overall, the fairy house is the same scale as the others; approximately 90mm high.

As always, read the instructions step by step, and make some dry fit checks (without glue) at each step. This will prevent any mistake and you will see exactly how the parts are installed.

If you have any kind of questions, feel free to send me a private message!

Have fun friends! Keep printing!