Game holder for Nintendo Switch

Thank you very much for your support.

Become a member of my Patreon Community and receive the commercial sales license of the printed works. www.patreon.com/useful3Dprints

Holder for Nintendo Switch games.

Put together your desired game holder.

Dimensions:

12 game slots approx. 170x77x25 mm

24 game slots approx. 338x77x25 mm

Stone: the stone offers 10 additional spaces for loose games. It extends the holder by an additional 65 mm in length. The stone can only be hooked in on the right-hand side and takes up 1 slot there.

Extension piece: the extension piece offers 10 additional slots for loose games. It is hooked between two holders and extends the length of the entire module by 65 mm. The extension block takes up one slot on the left and one on the right.

Stone block: the stone block is hooked between 2 holders and also serves as an extension. The stone block offers 5 additional slots for loose games. The stone block takes up one slot on the left and one on the right.

Question mark block: the question mark is hooked between 2 holders and also serves as an extension. The question mark offers 5 additional spaces for loose games. The question mark takes up one slot on the left and one on the right.

Tube: no function. Decoration only. The tube takes up 3 play spaces in the main holder.

Flagpole: no function. Decoration only. (Stone, extension stone, question mark block or stone block required) The flagpole takes up 1 space for loose games.

There are no limits to your creativity.

Nozzle 0.4mm

Layer height: 0.3mm

Support: No

Infill: 20%