Skip to content

CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!

3D-printed Gingerbread house with decorated lights, snow, lollipops. Behind there are christmas lights in a tree.
0016B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
0019.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
007.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
008.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
0013B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
002B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
004B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
0012B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
0017B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
005B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
0015B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
0014B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
009B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
0010B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
0011B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
001B.jpg CHRISTMAS GINGERBREAD HOUSE - NO SUPPORTS!
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 47.2k views
  • 500 likes
  • 618 downloads
  • 6 collections
  • 11 comments
  • 17 makes
License
3D design format
ZIP Folder details Close
  • CHRISTMAS 2023 - THE GINGERBREAD HOUSE.zip
    • INSTRUCTIONS/Thumbs.db
    • INSTRUCTIONS/WRITTEN INSTRUCTION.pdf
    • PHOTOS/Thumbs.db
    • STL FILES/BAMBULAB GINGERBREAD HOUSE FULL PROJECT AND AMS STL FILES/AMS - LOLLIPOP.stl
    • STL FILES/BAMBULAB GINGERBREAD HOUSE FULL PROJECT AND AMS STL FILES/GINGERBREAD HOUSE FULL PROJECT.3mf
    • STL FILES/BEIGE - DORMER.stl
    • STL FILES/BEIGE - MAIN HOUSE BODY.stl
    • STL FILES/BEIGE - ROOF.stl
    • STL FILES/BEIGE - SMALL ROOF.stl
    • STL FILES/BROWN - CHOCOLATE PORCH.stl
    • STL FILES/CLEAR - DOOR WINDOW PANE.stl
    • STL FILES/CLEAR - DORMER WINDOW PANE.stl
    • STL FILES/CLEAR - FRONT WINDOW PANE.stl
    • STL FILES/CLEAR - ROUND WINDOW PANE - 2x.stl
    • STL FILES/GREEN - CHIMNEY.stl
    • STL FILES/GREEN - DOOR FRAME.stl
    • STL FILES/GREEN - DORMER WINDOW INSERT.stl
    • STL FILES/GREEN - SIDE ROUND WINDOW INSERT - 2x.stl
    • STL FILES/GREEN - TREE - 4x.stl
    • STL FILES/GREEN-WHITE-RED - HALF JELLY BEAN - 24x.stl
    • STL FILES/ORANGE-YELLOW - CHIMNEY CAP -2x.stl
    • STL FILES/RED - CHRISTMAS TREE TOP CANDY.stl
    • STL FILES/RED - DOOR.stl
    • STL FILES/RED - DORMER WINDOW.stl
    • STL FILES/RED - FRONT WINDOW.stl
    • STL FILES/RED - LICORICE CORNER TRIM A.stl
    • STL FILES/RED - LICORICE CORNER TRIM B.stl
    • STL FILES/RED - LICORICE CORNER TRIM C.stl
    • STL FILES/RED - LICORICE CORNER TRIM D.stl
    • STL FILES/RED - LICORICE DOOR FRAMING.stl
    • STL FILES/RED - LOLLIPOP STRIPES - 4x.stl
    • STL FILES/RED - ROOF EDGE LICORICE - 2x.stl
    • STL FILES/RED - ROOF RED ICING - 2x.stl
    • STL FILES/RED - SIDE ROUND WINDOW - 2x.stl
    • STL FILES/WHITE - BASE FOR FUZZY SKIN.stl
    • STL FILES/WHITE - BASE.stl
    • STL FILES/WHITE - CHIMNEY SNOW.stl
    • STL FILES/WHITE - CORNER CREAMY TRIM 1.stl
    • STL FILES/WHITE - CORNER CREAMY TRIM 2.stl
    • STL FILES/WHITE - CORNER CREAMY TRIM 3.stl
    • STL FILES/WHITE - CORNER CREAMY TRIM 4.stl
    • STL FILES/WHITE - FRONT WINDOW INSERT.stl
    • STL FILES/WHITE - HORIZONTAL CREAMY TRIM 5.stl
    • STL FILES/WHITE - LOLLIPOP - 4x.stl
    • STL FILES/WHITE - LOLLIPOP STICK - 2x.stl
    • STL FILES/WHITE - ROOF CONTOUR ICING - 2x.stl
    • STL FILES/WHITE - ROOF ICICLES - 2x.stl
    • STL FILES/WHITE - SMALL ROOF ICING - LEFT SIDE.stl
    • STL FILES/WHITE - SMALL ROOF ICING - RIGHT SIDE.stl

Learn more about the formats
Publication date 2023-11-29 at 02:45
Design number 1609451
PA1_MAKER

PA1_MAKER

3D printer file info

3D model description

NOTE: COPYRIGHT PA1Β© - PERSONNAL USE ONLY. COMMERCIAL LICENSE ON MY PATREON. FULLACCESS AS SOON AS YOU JOIN, MULTI PARTS DESIGNS SO NO NEED FOR A MULTICOLOR PRINTER AND MOST OF THE PROJECTS ARE SUPPORT FREE!!! LINK TO PATREON :

https://www.patreon.com/PA1_MAKER

Here's a super cute Christmas gingerbread house!

You can use it either as a candy bowl (see photos) or a lighted decoration!

Like most of my projects:

-All the parts are already placed in the right orientation for printing.

-All the parts are support free

-You don't need a multicolor printer to print this model. Made of individual parts. (See last picture)

Plus, the whole project is printable on a mini size printer like the Prusa Mini or Bambu Lab A1 Mini!

So everyone will have fun with it.

Please, read carefully the instructions, because this project is a bit different than my other ones. Some parts, like the windows and door are different than usual.

IMPORTANT NOTES:

-FUZZY SKIN:

To add a snow effect, the base is printable with fuzzy skin. Two bases are included, one designed for a regular printing, the other one is for fuzzy skin settings. The tolerances on the holes are a little bit greater to compensate for the fuzzy skin. So use the right one! :)

You can also use fuzzy skin on other parts. But remember; fuzzy skin add some thickness to the parts. So scale them with this in mind. For example, i have use fuzzy skin on the chimney snow and the Christmas trees. So i have scaled the chimney snow at 103% to be sure it fits on the chimney. And because the christmas trees have a candy on top, with the fuzzy skin i needed to scale the candy by 103% to make sure it fits on the tree pin.

-CORNER TRIMS:

The corner trims on the house are all differents. So to simplify the whole thing, some parts are labelled with "A" "B" "C" "D", and the others are labelled "1" "2" "3" "4". You will find this info underneath each trim once printed. Refer to the instructions to see where each trim is glued.

-THE LOLLIPOP

You will find two versions of the lollipop in the files.

One for the regular printers. Which means you print the red stripes and the white section of the lollipop separately, and then you glue them together.

One version for the BambuLab Owners with AMS. A complete lollipop (without the stick) with the red and white stripes incorporated in the same file, ready for painting in bambu studio and being print with the AMS.

-DRY FIT CHECK

Always make a dry fit check (without glue) before gluing!!! This will prevent costly errors and you'ill be able to see what could cause a problem or not...

BAMBULAB OWNERS:

A 3mf file of the full project is included in the files. But look closely, some parts are optionnals, like the base (fuzzy skin or not) and the lollipop (both versions). Choose the ones you want.

ORIENTATION:

Some parts have a specific orientation. Like the icing on the roof, which seems square but its not. With the dry fit check i mentionned above, you will be able to find the correct orientation prior gluing.

Because this project is a bit differrent than the others, i have included those instructions to the dropbox files. So you can refer to them at any time in addition to the regular exploded views.

In any case, if you have any kind of problems with the files, feel free to send me a message here or on my Facebook page! ;)

Have fun and Happy Holidays!!!

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.