2022 edition of the christmas baubles.
This year I reworked the previous model but also worked on Disney models and bi colors.
*Decorate your Christmas tree with baubles personalized with the names of your children, parents and friends!
*You can also use them as table names for your guests.
*Give them as original gifts to friends and family.
! Free license - you can resell the printed model!
!! Do not resell or share the STL !
!!! For any customization request, please go through my Facebook page for a better management and organization !!!
2022 edition of the christmas ornaments.
This year I reworked the previous model but also worked on Disney models and bi colors.
*Decorate your Christmas tree with these ornaments personalized with the name of your children, parents and friends!
*You can also use them as table names for your guests.
*Give them as original gifts to your family and friends.
! Free license - you can resell the printed model !
!! Do not resell or share the STL !
!!! For any customization request, please go through my Facebook page for a better management and organization !!!
2022 editie van de kerstballen.
Dit jaar heb ik het vorige model herwerkt, maar ook gewerkt aan Disney modellen en tweekleuren.
*Tooi uw kerstboom met deze kerstballen gepersonaliseerd met de namen van uw kinderen, ouders en vrienden!
*U kunt ze ook gebruiken als tafelnamen voor uw gasten.
*Geef ze als origineel cadeau aan uw vrienden en familie.
! Gratis Licentie - u kunt het geprinte model doorverkopen !
!! Verkoop of deel de STL niet toegelaten !
!!! Voor elk aanvraag voor personalisatie, gelieve via mijn Facebook pagina te gaan voor een beter beheer en organisatie.!!!!!!
3D PRINTING PARAMETERS
PLA printing
This model takes on average between 1h30 and 2h30 depending on the following parameters:
Basic model at 3mm thickness - 2h30 maximum.
Model reduced to 2mm thickness - 1h30 in general.
To reduce the model you can easily do so via your slicer by disabling synchronized scaling.
***For bi-color
Do not adapt the height (leave at 3mm thickness).
Let your printer print 2 layers and then pause and change the filament color.
For a better rendering, I print the visible side against the platen, so we get a smooth and homogeneous rendering.
Printing in PLA
This model takes on average between 1h30 and 2h30 depending on the following parameters:
Basic model at 3mm thickness - 2h30 maximum.
Model reduced to 2mm thickness - 1h30 in general.
To reduce the model you can easily do it via your slicer by disabling the synchronized scaling.
***For the bi color
Do not adjust the height (leave at 3mm thickness).
Let your printer print 2 layers and then pause and change the filament color.
For a better rendering, I print the visible side against the plate, so we get a smooth and homogeneous rendering
Geprint in PLA
Dit model duurt gemiddeld tussen 1u30 en 2u30, afhankelijk van de volgende parameters:
Basismodel bij 3mm dikte - maximaal 2u30.
Verminderd model op 2mm dikte - 1u30 in het algemeen.
Om het model te verkleinen kun je dit eenvoudig doen via je slicer en door synchroon schalen uit te schakelen.
***Voor bi-color
Pas de hoogte niet aan (laat 3mm dik).
Laat je printer 2 lagen printen en pauzeer dan en verander de kleur van het filament.
Voor een betere weergave druk ik de zichtbare kant tegen de plaat, zodat we een gladde en homogene weergave krijgen.