Sling Puck Hockey

Now Released and more game surfaces to follow!

The goal of slingpuck is to be the first to shoot all your pucks into your opponent's camp! A simple 2 player game.

How to play

Rules:

1. Each player puts 5 pucks on their side.
2. The game is played with one hand.
3. Use the elastic to fire the pucks to the other side of the board.
4. Only one puck is moved at a time.
5. Slide both ends of the elastic band into the side grooves so that they snap into place.
6. As soon as the game starts, there is no pause allowed.
7. Whoever clears the board first is wins. Important Rules;

When the game starts, the puck cannot be moved to clear the way of pucks
If a puck should fly out of the board, the game doesn’t pause and the player must go pick it up by himself.
Suggested print settings:

3 walls
10% infill
4 Top/Bottom layers (ironing is optional)
supports are optional for the puck gate if you dont trust your bridging
Materials:

One piece of 1.75mm to join the boards together
12 3x2mm magnets
300-350mm of 2.5-3mm elastic cord
Changes:

added a rounded edge /w build in layers for easier coloring/painting on the STL file as well as BL 3mf file for easier access to the attached step files inside!

Revisions:

Dec 9 - Added more tolerance fo the hinge as some were having issues getting filaments through! Also added a hole cap to plug the holes between games to prevent pucks from escaping.

2-3 Walls
10% Infill
5 Top/Bottom Layers
0.2mm layers