ALFA ROMEO TWIN -CAM - ALTERNATOR

Alternator for Alfa Romeo Twin-Cam, can be used as an alternative to the original dynamo, the alternator was used on the latest Alfa Romeo car models, the alternator is complete with a removable pulley and is flanged to be installed in place of the supplied dynamo to the ALFA ROMEO TWIN -CAM kit.

The Alfa Romeo Twin-Cam engine is available separately here:
ALFA ROMEO TWIN -CAM - ENGINE https://cults3d.com/en/3d-model/various/alfa-romeo-twin-cam-engine

Disclaimer:
- The resale of my files is NOT allowed
- Printing for commercial use is NOT allowed
For authorizations and concessions please contact me here on Cults.

The photos represent the engine made with a resin printer, some photos are renderings of the project I made.
It is possible to print with FDM printer at moderate speed but obviously the level of detail will be lower and in some cases the supports will be necessary.
These are my printing parameters using Elegoo printers and YAJO standard resin.

PRINTER............BASE EXPO....NORMAL EXPO....RES

JUPITER............37sec.............2,0sec.................0,050mm

MARS 2 PRO.......45sec.............4,5sec.................0,050mm

SATURN.............35sec.............3,5sec.................0,050mm

Change scale:

1/10 > 1/25 -40,00 %

1/10 > 1/24 -41,66 %

1/10 > 1/18 -55,55 %

1/10 > 1/12 -83,33 %

1/10 > 1/8 -125 %