Gift packaging as a cooking pot

*******WICHTIG**

With an affordable Patreon subscription you have access to all files and also receive the license for the commercial sale of the printed files. Link -> patreon.com/user?u=98780208

Dear supporter, unwrap your gifts one more time. What could be more fun than surprising someone with a trick? We also asked ourselves this question for special occasions. Then our cooking pan was born. With this design, the recipient has no idea what they will receive. Not only that, they will actually think they are receiving a saucepan. Sooo great.

For this design you need a build plate with at least 256 mm x 256 mm space. If your printer does not have enough or even more space, you can adjust the design by scaling. The original file is approx. 9.5 cm high and has a diameter of approx. 22 cm. The design consists of 2 STL files. Do not forget to scale both STL files exactly the same so that the lid fits. Reductions of up to 20-30 % are therefore no problem. And if you can print larger, you can let off steam.

PACKAGING AID

If you are not a wrapping pro, I would recommend simply cutting the wrapping paper into smaller rectangles or circles. This helps a lot because it is very difficult to wrap things all the way around.

COOKING POT

Height of the first layer 0.20 mm

Layer height 0.20 mm

Wall lines: 2

Filling area: Archimedean chords (saves a lot of time)

Fill pattern: Standard

Filling density: at least 15 %

Support: Yes, standard support. No tree support

COVER:

Height of the first layer 0.20 mm

Layer height 0.20 mm

Wall lines: 2

Surface pattern: Archimedean chords (saves a lot of time)

Fill pattern: Standard

Filling density: at least 6%

Support: Only if you want. Not really necessary

This design is not about perfect aesthetics, but about functionality. If someone uses a larger nozzle such as 0.4, then you can also print with a layer height greater than 0.20 mm. This saves printing time