Hershey Kiss Christmas Tree - Stocking Stuffer Candy / Office Gift - COMMERCIAL LICENSE

This is a Hershey Kiss Christmas Tree that you fill with 9 Hershey Kisses (Pick your favorite holiday flavor!) into each slot on the tree.

These are the perfect for stocking stuffers, office gifts, secret santa, etc.. and VERY economical. At $5 a bag for Hershey Kisses the 10.8 ounce bag contains about 70 kisses and you could make 7 gifts.

To complete them, you can get clear gift bags and a decorative ties. I was able to get the ones you see in the photo at the local Dollar Tree.

The fit on the kisses is a little tight. That is intentional. The reason they are tight is to prevent them from easily falling out. Simply insert the kiss straight into the slot. You then press in from the top of the kiss and it should go right in.

You can alternatively scale the model slightly 101%-110% to get a bigger slot. I suggest printing one and seeing how it works for you and adjust from there.

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

This is a multipart model but the pieces just snap fit into place. The Star is a bit tight but it does fit well on an X1C. You may want to adjust your Horizontal Compensation to adjust for a tighter or looser fit depending on your particular 3D Printer.

The prepainted Bambu 3MF is included with the same settings I used. Be sure you use 250c temp if you use silk PLA it will give extra shine using this profile.